Assortment / System Description

Blinds applications
Local blinds operations
23
A6V10866237_en--_b_08 235 | 275
23 Blinds applications
23.1 Local blinds operations
This application control local operation of shading in the room. It is optimized
for short response times between pushing the button and the response by the
lighting actuator.
The room occupancy has the following commands are available to manually
operate shading:
● Up
● Down
● Stop and step up
● Stop and step down
Manual operation by the user can override any existing automation in the room.
Any manual operation must be released to return to automatic mode.
DXR2 applications have the following methods to this end:
● A central scheduler program
● Presence detector detecting non-occupancy
● Central commands from the management station
● By manual operation (first-time switch on or appropriately configured
button)
The LED feedback to the KNX PL-Link pushbutton pairs can be used to provide
the room user with feedback as to whether manual operation for shading is
enabled or locked. The LED feedback can also be disabled in another operating
mode. LED feedback is then switched off.
Description Name Default value
0:Always off
1:Manual operation locked
LED indication 0: LEDs switched
off
1:0=Man.
operation
enabled, 1=Man.
operation locked
Multiple blinds can be manually raised and lowered with a pushbutton pair in
the room. The corresponding blinds can be assigned to the push button pair.
Manual operation
overrides automatic
LED indication on
buttons
Group operation