User Manual

Application Sheet FCU042
Fan coil unit with variable fan speed, heating and cooling coil
(4 pipe) on triac output
DXR2..09T-101A
6 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662233_en--_c_--_01
Engineering ∂ ABT Site engineering tool is required to configure the DXR2 automation stations.
∂ See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and
workflow tutorials.
∂ Option combination according to available on-board I/Os on controller.
∂ B1 (optional extract air temperature sensor) to
be configured under ,Room temperature’ in order to serve for room
temperature control.
∂ D2
a
(on-board presence detector) to be configured in ABT Site under ‚Presence detector 2‘ for maximum
combination of optional devices.
Type of operation (NO or NC). Multiple devices of the same type can be connected.
Management
station
Sample presentation of a fan coil unit application on the Desigo CC management station.
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
Fax [phone]
www.siemens.com/buildingtechnologies
© 2015 Siemens Switzerland Ltd
Subject to change