Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationCompact actuating room automation stations, BACnet/IP, AC24 V

Table Of Contents

Desigo® Room Automation

Actuating DXR2, BACnet/IP 24V

DXR2.E10PL

-102B, DXR2.E10PLX-102B

Combination room automation station and actuator for buildings with increased

demands placed on functionality and flexibility in Room Automation

applications, VAV, Dual Duct and FPB applications. TRA offers the highest level

of flexibility for energy

-optimized solutions without sacrificing comfort.

●

Compact, programmable room automation stations for HVAC, lighting, and

shading.

●

Integrated with actuator for ease of installation.

●

BACnet IP Ethernet Communication (BTL certified).

●

2 port Ethernet switch.

●

KNX PL-Link bus to connect sensors, actuators, and operator units (including bus

power).

●

USB interface.

●

Operating voltage AC 24 V.

●

Built-in 10 Nm actuator mounted directly on the damper shaft.

●

Internal 0…500 Pa (0…2 in WC) differential pressure sensor.

●

Plug-in terminal blocks.

A6V11339446

Smart Infrastructure

2021-07-19

Summary of content (8 pages)

PAGE 1
Desigo® Room Automation Actuating DXR2, BACnet/IP 24V DXR2.E10PL-102B, DXR2.E10PLX-102B Combination room automation station and actuator for buildings with increased demands placed on functionality and flexibility in Room Automation applications, VAV, Dual Duct and FPB applications. TRA offers the highest level of flexibility for energy-optimized solutions without sacrificing comfort.
PAGE 2
Features ● ● ● ● ● Total Room Automation applications combining multiple disciplines (HVAC, lighting, blinds/shading) into one comprehensive solution. BTL Listed as a BACnet Advanced Application Controller (B-AAC) device. Fully programmable using block programming. Proven, pre-loaded applications. Operational modes (Comfort, Standby, Economy, Protection, and so on).
PAGE 3
● Blinds – one or two separate zones – Manual control: Up, Down, Predefined positions – Occupancy control and Vacancy control – Glare Protection – Energy efficiency functions including solar radiation optimization – Slat angle – Scene control Pre-loaded Application Options ● Separate maximum and minimum flow setpoints for both heating and cooling control. ● Separate minimum ventilation flow setpoints for each occupancy mode.
PAGE 4
Accessories Type Order number Designation 985-124 499 ohm Resistor Kit Product Documentation Topic Title Document ID Installation and mounting ADXR Installation Instructions A6V11260017 Global datasheet* ADXR2 24V IP ADXR2 24V MS/TP A6v11259958 A6V11259964 Setup and commissioning DXR VAV Start-up Procedures DXR FPB Start-up Procedures Balancing Procedures A6V10665935 A6V10665938 A6V10665943 Room Unit Datasheet Wall mounted A6V10394781 BTL listing ADXR PIC Statement * Please see the Gl
PAGE 5
Power data Power supply Operating voltage AC 24 V -15%/+20% Frequency 50/60 Hz Internal fuse 4 A irreversible Transformer with secondary current limitation of max. 10 A or external secondary current fuse Max. 10 A, (Class 2, 4A) Non-renewable fuse Max. 13 A, characteristic B, C, D as per EN 60898 Circuit breakers Apparent power (VA) for transformer design Base load including I/O without load by field devices Max. output load Triac at 500 mA each Max. load for AC 24 V field supply at 200 mA Max.
PAGE 6
Digital Inputs Contact voltage Universal input: 18V Digital input: 21V Contact current Universal input: 1.2 mA; 7.4 mA initial current Digital input: 1.6 mA; 9.4 mA initial current Contact resistance for closed contacts Max. 100 Ω Contact resistance for open contacts Min. 50 kΩ Differential pressure sensor (inputs P1+, P1-) Connections (nipple diameter) Dia. 5.2 mm (0.20 in) Measuring range 0 to 500 Pa (0 - 2.
PAGE 7
Wiring connections Pluggable screw terminals Copper wire or copper stranded wire with connector sleeves 1 x 0.6 mm ø to 2.5 mm2 (22 to 14 AWG) or 2 x 0.6 mm ø to 1 mm2 (22 to 18 AWG) Copper stranded wire without connector sleeves 1 x 0.6 mm ø to 2.5 mm2 (22 to 14 AWG) or 2 x 0.6 mm ø to 1.5 mm2 (22 to 16 AWG) Stripping length 6...7.5 mm (0.24...0.29 in) Slotted screws Size 1, tightening torque 0.6 Nm (0.
PAGE 8
Standards, directives and approvals UL Listing UL 916 PAZX - Conforms to UL916 9th and 10th Edition. UL 864 UUKL Smoke Control Equipment - Conforms to UL864 9th and 10th Edition. (Smoke Control ‘K’ variant only) Suitable for plenum area installation UL1995 Federal Communications Commission FCC CFR 47 Part 15 Class B CSA Compliance and cUL certification C22.2 No.