Assortment / System Description

Applications
4
16 | 275 A6V10866237_en--_b_08
4 Applications
Various application types can be used on each DXR2. They contain applications
for room conditions, lighting, and shading. It is the I/O mix of the DXR2
automation station that determine characteristics of the application types. Each
DXR2 can operate one active and configured application type.
At least one application type, suitable to the I/O mix is preloaded on each DXR2
automation station. This increases efficiency since there is no download.
A configurable application type can be replaced on the DXR2 by another
application type as needed. This is also true if you want to use a newer version
of an application type.
An application can be saved as a template in the project and reused after
configuring. A template is still fully configurable so that functionality can be
adapted even on a template.
All application types can be configured. The system automatically enables the
application function when selecting the on-board device configuration or
configuration of KNX PL-Link devices. The sets made by the system can be
checked and changed as needed.
Figure: Example for configuring on-board outputs
Preloaded
Load
Template
Configuration of
on-board inputs and
outputs