Installation Instructions

5 / 86

Siemens Desigo Desigo Room automation - Engineering, mounting and installation CM111043en_14

Smart Infrastructure About this document 2020-10-30

1.3 Before you start

The table below lists the third-party trademarks used in this document and their

legal owners. The use of trademarks is subject to international and domestic

provisions of the law.

Trademarks

Legal owner

BACnet American National Standard (ANSI/ASHRAE 135-

1995)

KNX® KNX Association, B - 1831 Brussels-Diegem Belgium

http://www.knx.org/

EnOcean® EnOcean LLC, Germany 82041 Oberhaching

www.enocean.com

DALI ™ c/o IEEE-ISTO

445 Hoes Lane

Piscataway, NJ 08854, USA

www.dali-alliance.org

All product names listed in the table are registered (®) or not registered (™)

trademarks of the owner listed in the table. We forgo the labeling (e.g. using the

symbols ® and ™) of trademarks for the purposes of legibility based on the

reference in this section.

This document may be duplicated and distributed only with the express permission

of Siemens, and may be passed on only to authorized persons or companies with

the required technical knowledge.

These documents were prepared with great care.

· The contents of all documents are checked at regular intervals.

· All necessary corrections are included in subsequent versions.

· Documents are automatically amended as a consequence of modifications and

corrections to the products described.

Please make sure that you are aware of the latest document revision date.

If you find any lack of clarity while using this document, or if you have any criticisms

or suggestions, please contact your local POC at the nearest branch office.

Addresses for Siemens RCs are available at www.siemens.com/sbt.

Trademarks

Quality assurance