Router ADSL User Manual

SIEMENS ADSL E-110_E-110-I user manual

Field Description

Status Select Start or StartOnData.

Start - To establish connection whenever you turn on the ADSL Router.

StartOnData - To establish connection whenever the device gets request to

connect to the Internet, such as when you open browser requesting for Web

pages.

Protocol Select PPPoA or PPPoE as required by your ISP.

Service Name For PPPoA, no need to set up.

For PPPoE, enter the Service Name if this is required by your ISP. Otherwise

leave it blank.

Use DHCP Select Disable unless your ISP instructs you to enable this service.

Use DNS Select Enable

Default Route Select Enable

Security Protocol Select PAP or CHAP as required by your ISP.

Password Enter the password given by your ISP.

4. After entering the fields above, click [Apply].

5. When confirmation page appears, click [Close].

6. You will return to the PPP Configuration page and see the newly added PPP entry.

The Oper. Status Link Up indicates the link is currently up.

Part 2: Check your connection status.

Select Home. On the System View page, the WAN Interfaces item should display the interface you

created to communicate with your ISP. A green ball in the Status field indicates a successful connection.

Part 3: Configuring the PC.

Keep your PC’s setting as a DHCP client. No further configuration is required.

76 Rev:01_040220