Specification

ManualsBrandsSiemens ManualsKitchenEQ 125 Amp 4-Space 8-Circuit Main Lug Indoor Load Center

Branch Circuits Indoor Enclosure  NEMA Type 1 Outdoor Enclosure  NEMA Type 3R

Max. QP Catalog Number Dimensions Dimensions

Ampere 1-Pole No. No. of Max Replace Suffix F (Flush) Std. (inches ) Catalog Std. (inches)

Rating of Spaces Circuits 2-Poles with S for Surface Mounting Pkg Height Width Depth Number Pkg. Height Width Depth

1Phase, 3 Wire SN, 4-24 Circuits / 100-200 Amperes, Aluminum Bus, Rated 100,000A IR

100 12 24 6 E1224ML1100FG  1 14-3/4 12-3/8 3-7/8     

125 4 8 2 E0408ML1125F  5 12-5/8 6-5/8 3-1/2 W0408ML1125  5 12-1/4 6 4-1/4

125 4 8 2      W0408L1125SPA50 1 12-14 6 4-1/4



125 8 16 4 E0816ML1125F  1 14-3/4 12-3/8 3-7/8     

200 4 4 2      W0404MB1200CT 1 20 11-1/8 4-3/4

1Phase, 3 Wire SN, 16-24 Circuits / 100-225 Amperes, Copper Bus, Rated 100,000A IR

100 10 20 4 E1020MB1100FCGP  1 14-3/4 12-3/8 3-7/8     

100 12 24 6 E1224ML1100FCU 1 14-3/4 12-3/8 3-7/8     

125 8 16 4 E0816ML1125FCU  1 14-3/4 12-3/8 3-7/8 W0816ML1125CU  1 14-3/4 12-1/8 4-1/4

225         W0406ML1125CU

 1 23 10 4-1/8

FEATURES

 Interiors offer removal in seconds

 Single phase

 One piece bus bar construction designed for use

only with circuit breakers

 UL Listed

 Main lugs and neutral on same plane, same drive

 Simple deadfront adjustment after trim is installed

 UL listed on 60/75°C conductors (see equipment

markings for applications)

 Positive load side circuit breaker hook rails

Main Lugs with Aluminum Bus and Copper Bus 100,000A IR



416 circuits, 100225 Amperes EQ Load Centers with main lugs feature

1 Phase, 3 Wire, SN 120/240 Volts AC a combination trim box in one package.

Load Centers

Breaker Used Indoor Enclosure  NEMA Type 1 Outdoor Enclosure  NEMA Type 3R

Frame Ampere No. of Catalog Std. Dimensions (inches) Catalog Std. Dimensions (inches)

Type Rating Poles Number Pkg. Height Width Depth Number Pkg Height Width Depth

1 Phase, 3 Wire SN  120/240 Volts AC

60 1-2 E0204ML1060S  5 9 -7/8 5-1/8 2-5/8 W0204ML1060  5815 4-1/4

QP, QPH, 100 2  1 17-1/8 7-3/8 4-5/16 W0202MB1100CU  1 17-3/8 7-5/16 4-5/16

HQP 125 2 E0204ML1125SCU 1 17-1/8 7-1/8 4-1/4 W0204ML1125CU 1 17-1/8 17-3/8 4-5/16

200 2      W0202ML1200CU 1 19-3/4 8-3/8 4-5/8

200 2      W0202MB1200CU  1 19-3/4 8-3/8 4-5/8

QPP, QPPH, 225 1-4      W0406ML1225CU  1 23 10 4-1/8

HQPP, QP

QJ2, 150 2      WB2150B  12717-3/8 4-15/16

QJH2, 200 2      WB2200B  12717-3/8 4-15/16

QJ2-H 225 2      WB2225  12717-3/8 4-5/16

3 Phase, 3 Wire 240 Volts AC or 3 Phase, 4 Wire SN  120/208 Volts AC, 120/240, 240 Volts AC

QP, QPH,HQP 100 2-3 E0303ML3100S 1 17-1/8 7-1/8 4-1/4 W0303ML3100 1 17-1/8 7-3/8 4-5/16

BQ, BQH, HBQ 100 2-3 EB3100S  1 17-1/8 7-1/8 4-1/4 WB3100  1 17-1/8 17-3/8 4-5/16

QJ2, QJH2, 225 2-3 EB3225F  127111 10-1/8 5-1/8 WB3225  1 27 10-1/8 5-9/16

QJ2-H

FEATURES

 Circuit breaker enclosures range from 60A to 225A, indoor and outdoor models.

 Designed for use exclusively with QP, QT, QPH, HQP, BQ, BQH, HBQ, QPP, QPPH, HQPP, QJ2,

QJH2 and QJ2-H circuit breakers.

 UL listed.

 Suitable for use as service entrance equipment.

 UL listed for 60/75°C conductors (See equipment markings for applications).

Circuit Breaker Enclosures

 Will not accommodate 2-pole GFCI or circuit breaker

with shunt trip.

 Main breaker factory installed.

 42,000A IR maximum. Copper wire only at 225A.

 QJ2 frame circuit breaker installed, rated 10,000A IR

 Will not accommodate GFCI or circuit breaker with

shunt trip.



Suitable for use as service entrance when not more

than six main disconnecting means are provided, and

when not used as lighting and appliance branch circuit

panelboard. Check local codes and restrictions.

 70 Amp maximum breaker.

 100 Amp maximum breaker.



Suitable for use as service entrance equipment when a

main breaker (125A maximum) is back-fed in a branch

position and used with main breaker retainer clip

(Cat. No. MBR1).

 Suitable for use as service equipment when a main

breaker (100A maximum) is back-fed in a branch

position and used with main breaker retainer clip

(Cat. No. MBR1).

 Includes factory installed QF250 ground fault circuit

breaker and ground bar.

 Two Q115 and one Q230 circiut breakers

included.

ALL-SITES

Temporary Power Outlet Panels

FEATURES

Enclosures

 Rainproof

Rainproof NEMA Type 3R construction.

 Quality Finish

All sheet metal components are

powder coated with the highest

quality finish and fabricated with

G90 galvanized steel.

 Installation Ease

Three raised mounting embosses

make installation a snap.

 Removable Deadfronts

Easily removable upper and lower

deadfronts allow easy access to

internal components for ease of

installation.

 Theft Resistant

The padlock provisions and elevated

upper deadfront design prevent

unauthorized removal of the plugs

or access to the circuit breakers.

 Meters Top or Bottom

Metered units are available with

meters at the top or bottom.

- Ring and ringless type meter

covers available.

- Utility grade, Landis & Gyr meter

socket base.

- Units with meter at bottom are

ideally suited for underground feeds.

- Meter sockets available to 125 amps

maximum.

 Removable Door

Sloped door allows additional room

for plugs, and is designed with

aesthetic forms to add rigidity

and sturdiness.

 Overhead/Underground Feeds

Surface devices have provisions for

overhead and underground feeds.

- For an overhead feed, use a readily

available Type RX, interchangeable

hub. Closure plate is factory

included.

- For an underground feed, an

extensive variety of easily removable

knockouts are provided.

 Light Option

Lighted option to assist with

nighttime site location and operation.

Light provisions are the longest lasting

and have the lowest operating cost in

the industry.

Pedestals

 One-Piece Construction

Rigid, one-piece pedestal construction

for all earth and pad mounted

devices. Thoroughly tested for torsion

and flexing resistance.

 Block Assembly

Loop-feed block assembly provides

connectors capable of accepting up

to 350 kcmil conductors.

(Available on pedestal devices only.)

 Pad Mount

Pad mounted devices are available.

(not shown)

Interiors

 Bus Bars

Plated copper bus bars provide the

best protection against corrosion.

 Copper Conductors

Ready to use! All internal

components are factory prewired

with copper conductors.

 Circuit Protection

All receptacles are protected by life-

time warranted Siemens circuit

breakers.

 Receptacles

Impact-resistant, thermoplastic,

commercial grade receptacles.

 GFCI Protection

All 125 volt, 20 amp receptacles have

GFCI protection. Siemens GFCI circuit

breakers are available to provide

protection for 20-50 amp receptacles.

 Wire Connectors

All wire connectors are suitable for

use with copper or aluminum wire.

(not shown)

























































54825_ProdGuide.qxd 10/17/2003 3:11 PM Page 4