User's Manual

Industry Automation and Drive Technologies - SCE
TIA Training Document Page 43 of 47 Module
E12
Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120
Parts 1 to 5 are to be combined into one model set.
Click on the button Options.
In the tab Extras under Multi-Model Use: select ON.
Highlight Part1 to Part5.
Save Part1 with the names
Click on the button Accept.
All additional information about operating the Web server based interface is provided in
Chapter 9.3 of the operating instructions "Image Processing System Vision Sensor SIMATIC
VS120“.