Data Sheet for Product

Technical Specification Sheet
Document No. 149-1020
March 28, 2012
Siemens Industry, Inc. Page 1 of 2
EcoView™ Thermostat
Model 45
Description
The EcoView Thermostat (Model 45) is a wireless,
digital thermostat, designed to control the majority of
HVAC systems. The unit contains a robust thermostat
interface and is designed for use with communicating
systems where remote monitoring and/or remote
control are desired.
Thermostat Features
• Local temperature display on a backlit LCD.
• Setpoint display and control.
• System Mode (Off, Auto, Heat, Cool).
• Fan Mode display and control (Auto, On).
• On-screen setup of HVAC type, Fan type,
changeover type for HP systems, F/C mode and
sensor calibration.
Technical Specifications
HVAC System Compatibility
• Central HVAC systems or separate
heating/cooling systems with separate RH/RC
transformers (split).
• Standard gas/electric HVAC systems: 2-stage
heating, 2-stage cooling.
• Heat pump HVAC systems: 3-stage heating, 2-
stage cooling.
• Fan system: Selectable for gas or electric heat
systems.
• Heat pump changeover valve (reversing valve):
Selectable for changeover with heat or
changeover with cool (O or B output).
ECO0038R1
67
MENU
HEAT
MODE
AUTO
FAN
76 H
Sys Off
Run
10:25 AM
RUN
74 C
5.75
(146.05)
1.00
(25.4)
4.00
(101.60)
• Emergency heat: In heat pump mode, emergency
heat mode is selectable from the thermostat.
• Compressor short cycle protection delay of six
minutes (adjustable).
• Automatic heating and cooling changeover.
• Fan cycler feature.
Remote Sensors
• The EcoView Thermostat supports up to two
indoor remote sensors.
• Remote sensor can replace an internal sensor or
provide averaging.
• Flush-mount remote temperature sensor (97-002).
• Duct Sensor (QAM2030.010).
Wiring Requirements
• 22 AWG standard thermostat multi-conductor
cable.
• Uses standard thermostat connections (C, R, W1,
W2, Y1, Y2, G).
• Remote sensors require 22 AWG Twisted
Shielded Pair. Maximum length 150 feet.
NOTE: Wiring length of < 100 feet is preferred.