User guide

Configuring the Wireless AP
Configuring VLAN Tags for Wireless APs
SCALANCE WLC711
User Guide, V8.11, 07/2012, C79000-G8976-C260-03 3-55
Configure AP36xx Default AP Settings
To Configure AP36xx Default AP Settings:
1. From the top menu, click Wireless APs. The Wireless AP screen is displayed.
2. In the left pane, click AP Default Settings. The Common Configuration tab is displayed.
3. Click the AP36xx tab.
Table 3-11 AP Default Settings
Field Description
AP Properties
LLDP Click to Enable or Disable the Wireless AP from broadcasting
LLDP information. This option is disabled by default.
If SNMP is enabled on the SCALANCE IWLAN Controller and you
enable LLDP, the LLDP Confirmation dialog is displayed.
Select one of the following:
Proceed (not recommended) — Select this option to enable
LLDP and keep SNMP running, and then click OK.
Disable SNMP publishing, and proceed — Select this option to
enable LLDP and disable SNMP, and then click OK.
For more information on using SNMP, see the SCALANCE
WLC711 Maintenance Guide.