User guide

Working with Reports and Statistics
Viewing AP Reports and Statistics
SCALANCE WLC711
16-8 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
The following is an example of the Wireless AP Inventory report:
Table 16-1 lists the column names and abbreviations found in the AP Inventory report:
Table 16-1 AP Inventory Report Columns
Column Name Description
Topology Ethernet port and associated IP address of the interface on the
SCALANCE IWLAN Controller through which the Wireless AP
communicates.
HW Hardware version of the Wireless AP.
SW Software version executing on the Wireless AP.
Country Country in which the AP is deployed
Antennas Antennas used
Telnet/SSH Telnet or SSH access (enabled or disabled)
LBS Location-based service (enabled or disabled)
BD Broadcast disassociation (enabled or disabled).
Persistence Enabled or disabled
P/To Poll timeout. If polling is enabled, a numeric value.
P/I Poll interval. If polling is enabled, a numeric value.
Wired MAC The physical address of the Wireless AP's wired Ethernet interface.
Description As defined on the AP Properties screen.
Rdo Radios: 1 or 2.