User guide

Configuring the SCALANCE IWLAN Controller
Configuring the SCALANCE IWLAN Controller for the First Time
SCALANCE WLC711
User Guide, V8.11, 07/2012, C79000-G8976-C260-03 2-21
2. In the left pane, click Topologies. The Topologies tab is displayed.
3. In the Internal VLAN ID box, type the internal VLAN ID.
4. From the Multicast Support drop-down list, select the desired physical topology.
5. To save your changes, click Save.
Setting Up Static Routes
When setting up a SCALANCE IWLAN Controller routing protocol, you must define a default
route to your enterprise network, either with a static route or by using the OSPF protocol. A
default route enables the SCALANCE IWLAN Controller to forward packets to destinations that
do not match a more specific route definition.
To Set a Static Route on the SCALANCE IWLAN Controller:
1. From the top menu, click Wireless Controller. The Wireless Controller Configuration screen
is displayed.