Operation Manual

T
emp
l
ate 123x158, Vers
i
on 1.0, VA
R
i
ssue
d
ate: 060529
84 Menus
l
e
f
t page
(
84
)
o
f
Pan
d
ora EF51 en-tr, A31008-H3550-A81-1-7619
(
07.07.2006, 10:37
)
© BenQ 2006, EF51_EN.
f
m
Active Line
This feature allows you to use two different phone numbers on one
phone. You can designate one number for dialling calls, while
accepting incoming calls dialled to both numbers.
Requires the support of the network operator.
User Group
• User Group: Used to create a closed group of callers based on a
service provided by the network operator. The members of a User
Group can call each other, but cannot conduct calls with anyone
outside the group unless special provisions are made.
• Outside Access: When the User Group service is activated,
enabling Outside Access will allow users in the group to make calls
to numbers outside the group. However, incoming calls will still be
restricted to calls within the group.
Network
Generally speaking, the network that your phone uses is configured
automatically. When turned on, the phone will automatically connect to
the network provided by your network operator, or will automatically
connect to the roaming network when you are outside the coverage of
your regular network. When outside the coverage of your regular
network, you can manually select the local network system.
Your network operator must be able to support network selection in
order for you to use this feature.
Network Mode
Allows you to set the network searching to automatic or manual.
• Automatic: If this option is selected, when outside the coverage of
your regular network the phone will automatically scan for an
available network.