Specifications

T400 Controller Facilities Manual
667/EB/20200/000 Page 22-1 Issue 9
22. EXAMPLE OF AN INTERSECTION ROAD TRAFFIC & LIGHT RAIL
VEHICLES
This section consists of an example of an intersection using Siemens MCE 0141 -
General Specification Forms. 667/DJ/20200/010.
Only the 0141 forms required for this particular example are included. For the
complete set of forms see the document above.
As many facilities as possible have been incorporated but it must be appreciated that no
controller would have every facility programmed.
The control of this generalised junction is not Controller specific and some of the
T400’s capabilities/facilities are not used or identified in the specification sheets. e.g.
Linked Fixed Time.
NOTE Any dummy phase(s) used will be specified as the next phase(s) after all the
hardware phases. i.e. If four hardware phases are used (A to D) the first
dummy phase would be phase E.