Electrical Lean Switch Installation Instructions

Diagnostics over Industrial Ethernet

Industrial Ethernet

A5E00152007-03

Windows 2000 – DLC Protocol Installation

● Select Start -> Settings -> Control Panel.

● Click on the "Network and Dial-up Connections" icon.

● From the list of network adapters, select the adapter for which you are going to

install the DLC protocol by right clicking on the required network adapter and

going to "Properties".

● Click on the "Install" button and select "Protocol".

● Click on the "Add" button and select the DLC Protocol from the protocols.

● Confirm your selection with "OK".

Note

Make sure you have your Windows CD at hand. You may need to reinstall

Windows service packs.

Windows XP – DLC Protocol Installation

For Windows XP, the DLC Protocol must be installed extra since it is not included

with the operating system. The supplied CD, however, contains a self-extracting

ZIP archive with the name "PST_XP_install.exe" with which you can install the

protocol. Start the "PST_XP_install.exe" file by double-clicking on it.

Note

You will information on the installation procedure in the "win_xp_readme.rtf" file.