Data Sheet for Product

Siemens
Building Technologies Division
Data Sheet 8360
usa.siemens.com/cerberus-pro
Product Overview
Used in conjunction wi
th Cerberus PRO Modular system panels, the Single-Node
Upload (SNU) is an optional system module that provides a solution for
uploading
| downloading Cerberus PRO Modular system configuration data
remotely.
A given SNU can easily transmit information from a personal
computer running t
he ZEUS-C custom-configuration tool to a maximum 64
Op
erator Interfaces (OIs | Model FCM2041-U3).
A dedicated Ethernet connection is the means used to allow SNU to directly provide
information from the
ZEUS-C tool to the remotely located Operator Interfaces (OIs).
Additionally, the Ethernet connection is separate from all existing system networks
(XNET
| HNET and DNET), as well as any other network devices.
A USB connector
– used in regular ZEUS-C communication – also provides the
physical connecti
on between each Model FCM2041-U3 and the SNU module.
However,
for Cerberus PRO Modular (fire or fire/voice) systems that operate with
the legacy
central-processor interface, a serial cable (Model PMI-1 UPLD-CBL)
must be ordered f
or use with the SNU assembly.
See:
DETAILS FOR ORDERING
on the following
page.
Each SNU module ha
s three
(3) connections: Power |
Ethernet and USB. The data
transported between the
Z
EUS-C tool and the single-
node upload
is made through
a direct 128
-bit | Secure
Sockets Layer (SSL)
connection.
Cerberus® PRO
Modular system
Single-Node Upload (SNU) Module
Models: SNU-KIT | SNU-ASSY | PS-5A
and PMI-1 UPLD-CBL
Architect & Engineer Specifications
 Cost-
effective, highly efficient
processor designed for transmitting
bidirectional data between the ZEUS-C
tool and Cerberus PRO Modular system
panels connected remotely
 Allows transferring and
extracting of information stored
in the Operator Interface (OI)
 Up to 64 Cerberus PRO Modular
system panels can pass along system
data from as many SNU assemblies
 Utilizes a dedicated (128-bit secure)
Ethernet cable connection
 Universal Serial Bus (USB) cable is used
between Model FCM2041-U3 interface
modules and each SNU assembly
 A serial cable (Model PMI-1 UPLD-CBL)
must be ordered for cable connection
between a legacy Person-Machine
Interface module and each SNU
processor
 One (1) Universal Serial Bus
(USB) cable is included in each
shipment of the SNU assembly
 SNU hardware mounts in a separate
enclosure, Model ENCL-01
 Each SNU assembly gets continuous
power from an integrated power supply
 UL 864 10
th
Edition and UL 1076
Listed; ULC-S527 3rd Edition Listed,
CSFM (#7165-0067:02222) and
NYCFD (#6160A) Approved
Model SNU
Single Node
Upload Module