User Manual

A6V11866322_enUS_a Siemens Industry, Inc.
Smart Infrastructure
INSTALLATION INSTRUCTIONS
Model ENCL-01
Enclosure
INTRODUCTION
The model ENCL-01 Enclosure from Siemens Industry, Inc., is a metal enclosure box for Siemens
management solutions.
The ENCL-01 consists of a door and a backbox, as shown in Figure 1.
DOOR
BACKBOX
Figure 1
ENCL-01 Enclosure
INSTALLATION INSTRUCTIONS
1. Select a clean, dry, shock and vibration free surface next to the Siemens XLS/Desigo Fire Safety
Modular/Cerberus PRO Modular Fire panels.
2. Mark the location of the upper mounting hole.
3. Drill the hole and screw in the top bolt ¼” in diameter, leaving a small gap between the wall and the
bolt.
4. Place the enclosure over the top bolt and allow it to slide down over the bolt.
5. Mark, drill, and install the bottom bolt.
6. Tighten both bolts securely against the back wall of the enclosure.