Operation Manual

18
en
● Separate the milk tube from the suction
pipe�
● Clean the individual parts with washing-
up liquid and a soft cloth�
● Rinse all parts with clean water and dry
them�
F
The upper and lower parts of the milk
system 4b, the milk tube 4c and the
suction pipe 4d can also be cleaned
in a dishwasher�
● Reassemble the individual parts�
● Place the milk system 4b back in the
appliance from the front, making sure it is
straight�
● Replace the cover 4a�
Cleaning the brewing unit (Figure G)
F
See also the Quick reference guide
in the storage compartment 16�
In addition to the automatic cleaning
programme, the brewing unit 14 should be
removed regularly for cleaning�
● Use the main switch J 1 to switch the
appliance completely off�
● Open the door 13 to the brewing unit�
● Slide the red latch 14a on the brewing
unit 14 all the way to the left�
● Press the eject lever 15 right down� The
brewing unit will be released�
● Take hold of the brewing unit 14 by the
recessed grips and carefully remove it�
F
Important: Clean it without using
washing-up liquid and do not put it in
the dishwasher�
● Remove the cover 14b and thoroughly
clean the brewing unit 14 under running
water�
● Thoroughly clean the strainer of the
brewing unit under the water jet�
● Thoroughly clean the inside of the appli-
ance with a moist cloth, removing any
coffee residues�
● Allow the brewing unit 14 and the inside
of the appliance to dry�
● Replace the cover 14b on the brewing
unit and then push the brewing unit 14
back into the appliance until it latches into
place�
● Press the eject lever 15 right up�
● Slide the red latch 14a all the way to the
right and close the door 13�