Operation Manual

en Daily care and cleaning
28
Cleaning the appliance
1. Wipe the outside of the appliance
with a soft, damp cloth.
2. Clean the display using a micro-fibre
cloth.
3. Any grounds residue in the grounds
shaft should be directed down the
shaft using a soft brush.
Notes
■ If the appliance is cold when
switched on, or if it is switched off
after dispensing coffee, it rinses
automatically. The system is
therefore self-cleaning.
■ If the appliance has not been used
for a prolonged period of time (e.g.
while you are on holiday), clean the
entire appliance thoroughly,
including the milk system and
brewing unit.
Cleaning the drip tray and the coffee
grounds container
~ Fig. %
Note: The drip tray and coffee grounds
container should be emptied and
cleaned every day in order to prevent
deposits.
1. Pull the drip tray with the coffee
grounds container forwards and out.
2. Remove the drip plate.
3. Empty and clean the drip tray and
coffee grounds container.
4. Wipe out the interior of the appliance
(intake trays).
Cleaning the milk container
~ Fig. '
Note: For reasons of hygiene, the milk
container should be cleaned regularly
1. Dismantle the milk container into its
individual parts.
2. Clean all parts of the milk container
or put them in the dishwasher.
Cleaning the milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
~ Fig. #, ~ Fig. &
Manually clean the milk system on a
weekly basis, or more frequently if
required. For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 31
Remove the milk system:
1. Remove the milk container from the
appliance.
2. Slide the outlet system to the bottom
position.
3. Press the unlocking mechanism at
the top right.
4. Fold the cover down towards the
front and remove.
5. Remove the milk system and
dismantle into individual parts.
6. Clean the individual parts with
detergent solution and a soft cloth.
7. Rinse all parts with clean water and
leave to dry.
Note: All parts of the milk system can
be cleaned in the dishwasher.
Detergent residues in the milk system
must be thoroughly removed following
the rinsing process.
Inserting the milk system:
1. Assemble the individual parts of the
milk system.
2. Insert the milk system into the cover.
3. Position the cover at the bottom and
pivot upwards until it engages.