Operating instructions

Commissioning and Diagnostics

6.7 Commissioning and starting up the ET 200iSP

ET 200iSP

Operating Instructions, 01/2010, A5E00247483-04

149

6.7.3 Commissioning the ET 200iSP

Commissioning the ET 200iSP

Table 6- 8 Commissioning the ET 200iSP

Step Procedure See

1 Turn on the power supply for the ET 200iSP. Chapter "Wiring (Page 103)"

2 Watch the STATUS LEDs on the ET 200iSP and on

the DP master.

 Chapter "Basics of

commissioning and diagnostics

(Page 133)"



Manual to the DP master

Note

The ET 200iSP supports the default startup.

The following conditions then apply:

 Transferred parameters are saved and used after the switching on the supply voltage on

the Power Supply PS.

 The configuration can be performed with the General Identification Format according to

the PROFIBUS standard.