Technical data

28 SIMATIC ET 200L
SIMATIC ET 200L
ET 200L block IO
The compact SIMATIC ET 200L I/O device to the IP20 degree
of protection comprises one terminal block and one elec-
tronic block. Connection to PROFIBUS DP (with a transmis-
sion rate of 1.5 Mbit/s) is through the interface integrated
in the electronic block.
Terminal block
The terminal block accommodates the electronic block. It car-
ries the wiring, so that no cables need to be unplugged when
the electronic block is replaced. The terminal blocks have a 2-
wire connection system as standard. As an option, additional
terminals can be clipped on to enable 3-wire or 4-wire connec-
tion to be used.
The terminal block can be mounted in any position on a stan-
dard rail. Terminal blocks are available for 16 and 32 channels
with screw-type or spring-loaded terminals.
Electronic block
The electronic blocks contain the digital input and output
channels for 24 V DC. The station address is set using rotary
coding switches on the electronics block.
1
) As SIPLUS component also for extended temperature range -25 °C to +60 °C
and corrosive atmosphere/condensation (www.siemens.com/siplus)
Terminal block Order No. group
16 channels, screw-type terminals
6ES7 193-1CH0.
1)
16 channels, spring-loaded terminals
6ES7 193-1CH1.
32 channels, screw-type terminals
6ES7 193-1CL0.
32 channels, spring-loaded terminals
6ES7 193-1CL1.
Electronic block Order No. group
16 DI
6ES7 131-1BH.
1)
32 DI
6ES7 131-1BL.
16 DO; 0.5 A
6ES7 132-1BH.
32 DO; 0.5 A
6ES7 132-1BL.
16 DI and 16 DO; 0.5 A
6ES7 133-1BL.
© Siemens AG 2007