Technical data

38 SIMATIC ET 200pro
Electronic modules Pneumatic components
Electronics modules
Digital electronics modules with 4 and 8 channels for 24 V and
analog electronics modules with 4 channels are available for
voltage, current and resistance thermometers.
Different connection modules are available for screwing onto
the I/O:
■ CM IO 8xM8
■ CM IO 2xM12, 4xM12, 8xM12
■ CM IO 1xM23
Fail-safe modules
The following connection modules are available:
■ CM IO F 12xM12
■ CM IO F 16xM12
RFID communication
Pneumatic components
The PM 148-P pneumatic
module supports the use of
ET 200pro for standard pneu-
matic applications. Up to 7
pneumatic modules can be
used per ET 200pro station.
■ Two single-action or dual-
action cylinders can be
controlled through the
pneumatic module. Inte-
gration of electronics and
pneumatics on the same
module reduces the im-
plementation outlay.
■ The pneumatic module is designed for a CPV 10 or CPV 14
valve terminal from FESTO. The ET 200pro can then also be
used for applications requiring flexible pneumatics. A wide
variety of valve functions from the standard FESTO spec-
trum and a choice of flow rates facilitate an extensive range
of applications.
Digital electronic modules Order No. group
EM 8 DI DC 24V 6ES7 141-4BF.
EM 8 DI DC 24V HF 6ES7 141-4BF.
EM 4 DO DC 24V, 2A 6ES7 142-4BD.
EM 4 DO DC 24V, 2A HF 6ES7 142-4BD.
EM 8 DO DC 24V, 0.5A 6ES7 142-4BF.
Analog electronics modules Order No. group
EM 4AI U HF 6ES7 144-4FF.
EM 4AI I HF 6ES7 144-4GF.
EM 4AI RTD HF 6ES7 144-4JF.
EM 4AO U HF 6ES7 145-4FF.
EM 4AO I HF 6ES7 145-4GF.
Fail-safe
electronic modules
Order No. group
EM 8/16 F- DI DC 24V 6ES7 148-4FA.
EM 4/8 F-DI/F-DO DC 24V 6ES7 148-4FC.
RFID communications
module RF 170C
Order No. Group
Electronic module 6GT2002-0HD.
Terminal block 6GT2002-1HD.
PM 148-P pneumatic module
Digital outputs 16,
For controlling the valves
FESTO valve terminals CPV 10, CPV 14
(can be ordered from Festo)
Order No. group 6ES7 148-4E.
Pneumatic module PM 148-P with
Festo valve terminal
© Siemens AG 2007