User manual

14
Deactivating the Baby Call function
Press the MENU key
Select the LOCK OPTIONS option by
using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
:
Enter the password (4 digits)
Select the BABY CALL option by using
the DIAL/SELECT key
Select the N option by using the
ARROW key
Press the MENU key
Note:
The Baby Call function will not work when
the telephone was programmed with the
TOTAL LOCK option.
Function keys for special services
This telephone incorporates facilities to
access some special services on your
telephone line.
The dedicated keys to the special services
allow the direct operation of:
• Follow-me
• Call Waiting
• Conference
• Mailbox
Note:
• These services must be contracted
together with your local operator.
• In some countries the follow-me
service could not work properly
because of the access code to this
facility.
Follow-me
The Follow-me service allows automatic
transference of received calls to another
telephone number. To activate follow-me,
proceed in the following way:
Lift the handset
Press the FOLLOW-ME key (position
7 on page 3)
:
Dial the telephone number to where
you want to make the call transference
Press the FOLLOW-ME key (position
7 on page 3)
To deactivate the follow-me service, press
the Follow me key
twice.
Call Waiting
If during a conversation you hear the
warning tone of a waiting call, you can
answer it by pressing the Call Waiting key.
. The first call will be retained.
When you wish to pass from one call to
another, press the Call Waiting key
again. The procedure can be repeated as
many times as you wish. To finish the
communication in progress and continue
with the other, press the Release Call key
. To finish the last communication, just
hung up.
Consultation
When, during a conversation, you wish to
make a consultation, press the FLASH key
to get the dial tone again. Dial the
desired number to set up the consultation
communication.
Once the consultation is made, press the
Call Waiting key
to change between the
calls or the Release Call key
to finish
the communication in progress and
continue with the other one.