HA 8000 (22) P/T SD Illustration Controls 1 2 3 4 5 6 7 8 9 10 11 12 13 Name keys labeling card Program key (SET) R key Last number redial key (REDIAL) Micophone off key (MUTE) Volume key (HIGH) Volume key (LOW) Handfree and all person listen key Keypad Handfree Micophone In-Use LED indicator Handfree LED indicator
Catalogue Startup Important Information ………………………………………………… Contents of the package ………………………………………………. Hooking up the equipment ……………………………………………. Note on installing your equipment ……………………………………. 2 3 4 5 Basic settings Checking the signaling method set ……………………………………. Setting the signaling method ………………………………………….. Adjusting the ringer volume ………………………………………….. Setting the handset volume …………………………………………… Adjusting the ringer tone sequence …………………………………… Setting the tone ringing melody ……………………………………….
Catalogue Remote control, data transfer Temporary swithover of the signaling method……………… 15 Important information for users Taking care of your telephone……………………………….. 16 If your telephone malfunctions………………………………. 16 Technical data………………………………………………... 16 Quick reference guide………………………………………...
Startup Important information Signaling method Before using your telephone, you should check the signaling method and set the correct method if necessary. HA 8000(22) P/T SD is set to dual-tone multi-frequency signaling in home.
Startup Contents of the package 3 1. euroset 812 4. Telephone connecting cable 2 .Handset 5.Operating instructions 3. Handset connecting cable 6.
Startup Hooking up the equipment Once a few simple connections have been made, your telephone is ready for operation: 1. Coiled handset connecting cable • Long straight end of the handset connecting cable: Insert the connector into the smaller socket on the bottom of the unit until it clicks into place. Place the cable in the side cable guide. • Connect the coiled end to the handset. 2. Connecting cable • Insert the connector into the larger socket on the bottom of the unit until it clicks into place.
Startup Notes on installing your equipment: We recommend placing the equipment on a non-slip surface. In view of the wide range of varnishes and polishes used for furniture nowadays, the possibility of the surface being marked as a result of contact with the equipment cannot be completely ruled out. Make sure that the equipment is not exposed to direct sunlight or to other sources of heat.
Basic settings Checking signaling method set Lift the handset ;you will hear a dial tone. Dial any digit e.g. 5 When you no longer hear a dial tone, the signaling method is set correctly. Go on to the next page. If you still hear the dial tone, this means that you must set the signaling method (see below) Replace the handset. Notes: If the telephone is operated in a home telephone system (PABX), you may not hear a dial tone when you lift the handset. In this case, dial the code of an internal party.
Basic settings Adjusting the ringer volume The ringing signal is preset to the maximum volume (level 6) Lift the handset or press the loudspeaker key. Press the SET key. Press key 5 The set ringing signal sounds so that you can check it. Press key 1;the ringer is switched to low volume ( minimum). The volume is set in the same manner for keys 2 through 5. Press key 6;the ringer is set to high volume (maximum). The selected volume is saved when you press the SET key.
Basic settings Adjusting the ringer tone sequence You can adjust the ringer tone sequence in 4 stages, the tone sequence is preset to stage 4. Lift the handset Press the SET key Then press key 6, the ringer sounds so that you can check it E.g. if you press key 3 Press the SET key to confirm your setting. This saves the setting. Notes: All settings which are begun with the SET key must also be terminated with the same key. Only then will the desired settings be stored.
Dialing with the euroset 812 Dialing with the keypad Lift the handset Dial the desired call number e.g. 412314 Now make the phone call and hang up at the end of the conversation Notes: • You can manually dial numbers of any length. • During dialing, you can insert 1-second pauses(P) by pressing the REDIAL key (not in the 1st position) e.g.0 REDIAL 2368. These pauses are then includes in the redial function. On-hook dialing Press the SPEAKER key until the display lights up.
Dialing with the euroset 812 Last number redial Lift the handset Press the REDIAL key. The call number last entered is dialed automatically ( up to 32 digits) Saved number redial Lift the handset Dial the desired call number with the keypad ( or by pressing the REDIAL key). Nobody answers or you hear a busy signal. Press SET key Then press REDIAL key The call number is saved in the notepad. Notes: Only a maximum of 32 digits are transferred to the memory.
Dialing with the euroset 812 Saved number redial ( notepad ) Lift the handset Press the SET key Then press the REDIAL key The call number is dialed from the notepad. Notes: The call number remains stored until a new call number is stored in the notepad. Dialing with name keys Lift the handset Wang Press the desired name key ( for one of the 10 destinations) .
Dialing with the euroset 812 Storing and checking name keys Lift the handset Press SET key Wang Press the desired name key for one of the 10 destination. Enter the call number to be stored up to 32 digits; the old call number is erased. Press the SET key again. The new number is stored under the name key. Write the name on the label. You have called a party and would like to store this number under a name key.
Making phone calls with and without the handset In handsfree mode, you can make phone calls with the handset on-hook. This allows you to keep your hands free. For this purpose, the telephone has a small opening with a microphone in the right-hand corner. This opening must remain unobstructed in order to use handsfree mode. There should be no objects in front of it, and there should be no tablecloth under the telephone. If you lift the handset and activate the loudspeaker, you are in open listening mode.
Making phone calls with and without the handset Deactivating handsfree mode You want to switch from handsfree mode to normal phone mode. Lift the handset. The loudspeaker and built-in microphone are deactivated automatically. Allowing others to listen in on a call Press the SPEAKER key While conducting a call with the handset. Other people can now listen to the call via the telephone loudspeaker. You can then deactivate the loudspeaker by pressing SPEAKER again.
Remote control, data transfer Temporary swithover of the signaling method If your telephone is connected to an exchange with pulse dialing (pulse), you must temporarily swith your phone over to dual-tone multi-frequency signaling (DTMF), as described below, in order to operate a device such as an answering machine by remote control or to perform a data transfer. Conduct a call… Press the * key You can now enter the appropriate numbers for the services.
Important information for users Taking care of your telephone Simply wipe the equipment with a damp or antistatic cloth. Never use a dry cloth ( due to static charging) If your telephone malfunctions Not every malfunction means that your telephone has developed an actual fault, if it is a simple one, you are likely to save both time and money if you can trace the cause of it youeself.
Quick reference guide Store the telephone number under the name key.
