Operation Manual

16
Important information for users
Taking care of your telephone
Simply wipe the equipment with a damp or antistatic cloth.
Never use a dry cloth ( due to static charging)
If your telephone malfunctions
Not every malfunction means that your telephone has developed an actual fault, if it
is a simple one, you are likely to save both time and money if you can trace the
cause of it youeself.
• No dial tone on lifting the handset, no display:
Is the connecting cord properly attached to the telephone and the telephone jack.
• You cannot dial out
The connection is OK. You must set the correct signaling method.
• Interference in handsfree mode, brief interruptions occur:
Avoid background noises, e.g. calls made by other people, music, etc.
Lower the loudspeaker volume. Move closer to the microphone.
If there is a great deal of interference: Conduct the call over the handset.
• The other party cannot hear you
Is the mute key activated? Press the key again. Is the connector on the handset
cable attached properly?
• In conjunction with the PABX systems only:
No connection or wrong connection when dialing from the memory.
Program an exchange code.
Technical data
Pin assignments of the connecting cord socket on the bottom of the telephone set: