Commissioning Instructions

Siemens A6V11422293_en--_d

Smart Infrastructure 2021-11-12

Filter Function (new in ABT Go 4.3)

With ABT Go 1.3, a new filter function has been introduced. As a result, menus have

become interactive; the parameters for a function are shown only if that function is available

and has been activated.

Example: Control mode, flow characteristic and power limitation

Control mode Position Control mode Volume flow Control mode Power

In control mode Position [1], no further

settings are possible.

In control mode Volume flow [2], settings for

the flow characteristic are available.

In control mode Power [3], further settings

for design power and maximum power are

available under Limitation.

All parameters may be viewed by tapping on the filter

symbol [4]; however, only the parameters that are

accessible can be modified.