EC Declarations

s
EU Konformitätserklärung / EU Declaration of Conformity
Nr./No. A5W00056027-005
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, ist jedoch
keine Beschaffenheits- oder Haltbarkeitsgarantie. Die Sicherheitshinweise der mitgelieferten
Produktdokumentation sind zu beachten.
This declaration is an attestation of conformity with the indicated Directive(s) but does not imply
any guarantee of quality or durability. The safety instructions of the accompanying product
documentation shall be observed.
Siemens Schweiz AG
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
Unrestricted Page 1/7
© Siemens Schweiz AG, Smart Infrastructure
A5W00056027-005
Produktbezeichnung Energy Measuring Valve DN…
Product identification
Hersteller
Siemens Schweiz AG
Manufacturer
Anschrift
Theilerstrasse 1a
Address
CH-6300 Zug / Switzerland
Die alleinige Verantwortung für die Ausstellung dieser
Konformitätserklärung trägt der Hersteller.
Der oben beschriebene Gegenstand der Erklärung erfüllt die einschlägigen
Harmonisierungsrechtsvorschriften der Union:
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation:
RED-Richtlinie:
2014/53/EU Richtlinie des Europäischen Parlaments und des Rates vom
16. April 2014 über die Harmonisierung der Rechtsvorschriften der
Mitgliedstaaten über die Bereitstellung von Funkanlagen auf dem Markt;
Amtsblatt der EU L153, 22/05/2014, S. 62106 (ab 13.06.2016)
RED Directive:
2014/53/EU Directive of the European Parliament and of the Council of
16 April 2014 on the harmonisation of the laws of the Member States
relating to the making available on the market of radio equipment; Official
Journal of the EU L153, 22/05/2014, p. 62106 (from 13.06.2016)
PED-Richtlinie:
2014/68/EU Richtlinie des Europäischen Parlaments und des Rates vom
15. Mai 2014 zur Harmonisierung der Rechtsvorschriften der
Mitgliedstaaten über die Bereitstellung von Druckgeräten auf dem Markt;
Amtsblatt der EU L189, 27/06/2014, S. 164259
PED Directive:
2014/68/EU Directive of the European Parliament and of the Council of
15 May 2014 on the harmonisation of the laws of the Member States
relating to the making available on the market of pressure equipment;
Official Journal of the EU L189, 27/06/2014, p. 164259
RoHS-Richtlinie:
2011/65/EU Richtlinie des Europäischen Parlaments und des Rates vom
8. Juni 2011 zur Beschränkung der Verwendung bestimmter gefährlicher
Stoffe in Elektro- und Elektronikgeräten; Amtsblatt der EU
L174, 1/07/2011, S. 88110
RoHS Directive:
2011/65/EU Directive of the European Parliament and of the Council of 8
June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment; Official Journal of the EU L174,
1/07/2011, p. 88110
Die Übereinstimmung des bezeichneten Produkts mit den Vorschriften der
angewandten Richtlinie(n) wird nachgewiesen durch die Einhaltung folgender
Normen / Vorschriften:
The conformity of the product described above with the provisions of the applied
Directive(s) is demonstrated by compliance with the following standards /
regulations:
Referenznummer einschließlich Ausgabedatum
Reference number including Edition
EN IEC 63000:2018
EN IEC 63044-3:2018
EN 60730-1:2011
EN 50491-5-1:2010 EN IEC 63044-5-1:2019
EN 60730-1:2016 +A1:2019
EN 50491-5-2:2010 EN IEC 63044-5-2:2019
EN 60730-2-14:1997 + A1:2001 + A11:2005 + A2:2008
EN 50491-5-3:2010 EN IEC 63044-5-3:2019
EN IEC 60730-2-14:2019
EN 300 328 V2.1.1 EN 300 328 V2.2.2
EN 61000-6-2:2005
EN 301 489-1 V2.2.0 EN 301 489-1 V2.2.0
EN 61000-6-3:2007 +A1:2011 +AC:2012
EN 301 489-17 V3.2.0 EN 301 489-17 V3.2.4
EN 62311:2008 EN IEC 62311:2020
Pressure Accessories
EN 1092-3:2003
Fluid group 2
EN 12266-1:2012
Category I, module A
EN 12516-2:2014
CH-6300 Zug, 21.07.2021
Unterzeichnet für und im Namen von: / Signed for and on behalf of:
Siemens Schweiz AG
i.V. ………………………………………………
Thomas Nitz
Product Management, Portfolio & Innovation Head
i.V. ……………………………………………..
Rico Jaeggi
Head of R&D Competence Center Zug
Digitally signed
by Nitz Thomas
Date: 2021.07.23
15:20:23 +02'00'
Digital signiert von Jaeggi Rico
DN: cn=Jaeggi Rico, o=Siemens,
email=rico.jaeggi@siemens.com
Grund: Ich stimme dem Dokument
zu
Datum: 2021.07.23 15:22:40 +02'00'
Jaeggi
Rico

Summary of content (7 pages)