Commissioning Instructions

13
Siemens A6V11422293_en--_d
Smart Infrastructure 2021-11-12
While updating from an older version to
version 1.18 with ABT Go, the device
will discard the Basic Configuration -
the basic configuration CANNOT be
restored with a backup file!
After the update, the basic configuration
has to be rebuilt manually by the user.
To avoid a loss of information, note
down all data from the basic
configuration – either using the table
below, or by taking screenshots.
Value Update 1 Update 2 Update 3
Setpoint source
Signal type for X1
Output X2
Signal type for X2
Input X3
Signal type for X3
It is not necessary to consider the parameters for balancing, limitation, valve characteristic
etc. during the update – all these parameters will be automatically restored.