Commissioning Instructions
50
Siemens A6V11422293_en--_d
Smart Infrastructure 2021-11-12
Design values and temperature limitation
1 2 3 4
Select Commissioning [1]. Select Limitation [2] to set design
temperature (recommended) as well as return
temperature limitations for the circuit.
Select Design primary flow temperature
[3.1] and Design primary return temperature
[3.2] to set design temperature flow and
return.
Note that the acting direction of the controller
depends on the configured values for design
primary flow temperature and design primary
return temperature.
● Use slider and +/- to set design
temperature flow;
● Or enter value manually.