Commissioning Instructions

57
Siemens A6V11422293_en--_d
Smart Infrastructure 2021-11-12
5 6 7 8
Select Return temperature setpoint for
heating [5].
● Use slider and +/- to set return
temperature limitation value for cooling;
● Or enter value manually.
Gain for return temperature control [7] and
Tn for return temperature control may be
kept, unless there are very hard requirements
to keep the limit.
● If this is the case, it may be necessary to
increase Gain and reduce Tn.
All data are set.
If required, select Backup mode [8] to define
behavior in case of missing setpoint.
Commissioning: Backup Mode [➙ 62]