User Manual

ManualsBrandsSiemens ManualsExtinguishing - Cylinder ValvesF230-CO2-250

A6V11162656_en--_a Smart Infrastructure

2020

Building Products

Sinorix™

F230-CO2-250

CO2

High pressure CO2 cylinder valve

● Quick release cylinder valve for high pressure CO2 extinguishing systems

● To be used with CO2 extinguishant cylinders

● Activated by one or two ACTF230 type actuators

● Maintenance-free valve, compatible with multiple filling operations

● To be used with CO2 extinguishant cylinders with dip tube

Product code: S54476-B500-A1

Summary of content (7 pages)

PAGE 1
Sinorix™ F230-CO2-250 CO2 High pressure CO2 cylinder valve ● ● ● ● ● Quick release cylinder valve for high pressure CO2 extinguishing systems To be used with CO2 extinguishant cylinders Activated by one or two ACTF230 type actuators Maintenance-free valve, compatible with multiple filling operations To be used with CO2 extinguishant cylinders with dip tube Product code: S54476-B500-A1 A6V11162656_en--_a 2020-09-02 Smart Infrastructure Building Products
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions The valve is closed on a full and operational cylinder. The valve operates on the differential pressure principle with two chambers separated by a piston and with different effective areas. The gas contained in the upper chamber applies pressure to the piston and keeps the valve closed.
PAGE 3
Equipment combinations Actuators Reference Description Product code ACTF230-EL Solenoid actuator S54476-B525-A11 ACTF230-EL M Solenoid actuator with monitoring contact S54476-B525-A1 ACTF230-EL B C Solenoid actuator for CO2 with blocking device S54476-B525-A33 ACTF230-EL BM C Solenoid actuator for CO2 with blocking device and monitoring contact S54476-B525-A3 ACTF230-PNEUMS Single pneumatic actuator S54476-B520-A1 ACTF230-PNEUMD Double pneumatic actuator S54476-B520-A2 ACTF230-PNEUMX S
PAGE 4
Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
PAGE 5
Torques Item Fitting Tightening torque EL Solenoid actuator 20 Nm PM Manual or pneumatic actuator 8 Nm 4 Cylinder connection 190 Nm ±5 Nm 5 Dip tube 20 Nm +5/- 0 Nm 6 Valve outlet safety cap 12 Nm 8 Pilot hose 6 Nm Maintenance Storage ● Store in its original packaging, protected from shocks. ● Store in a clean and dry location, protected from bad weather. Inspection ● Maintenance-free valve. ● Check the good condition of the product.
PAGE 6
Technical data Technical data Diameter DN 12 mm Free cross-sectional area: 100 mm² Operating pressure at 20 °C 57.3 bar Operating pressure at 50 °C 140 bar Maximum pressure 240 bar Burst disc 250 bar Leak rate 10-4 mbar × l / s, helium Minimum cylinder size listed in approval 13,4 L / 10 kg CO2 Gaseous agent CO2 Threads Cylinder connection Valve outlet Dip tube connection Pilot hose port Solenoid actuator port Pneumatic or manual actuator port W28.8 x 1/14", 25E (EN ISO 11363-1) M24x1.
PAGE 7
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies Siemens Schweiz AG Building Products Document ID A6V11162656_en--_a Edition 2020-09-02 © Siemens Switzerland Ltd, 2017 Technical specifications and availability subject to change without notice.