Sinteso™ Fire control panel (modular) FC2030 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso. ● ● ● ● ● ● ● ● ● ● ● A6V10087532_n_en_-2021-10-22 Fire control panel for max.
Features and Functions System The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. System overview Fig.
1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + firewall + virtual private network 8 Fire damper with actuator Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management system via BACnet, up to 16 control panels and terminals can be networked.
Fig. 3: Backbone 1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + firewall + virtual private network Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
Control panels General features and functions ● Fast Ethernet interface for a heterogeneous network ● Processes signals from the detector series Sinteso FD20 as well as from earlier detector series ● Interface to Siemens danger management system ● Slots for RS232 and RS485 serial interfaces ● Floor repeater displays, terminals and alarm devices on the FDnet detector line with power supply via FDnet ● All detector lines are monitored for ground faults.
FC2030-AA Housing (Comfort) FDnet detector line: ● 756 addresses ● 2 loops / 4 stubs ● Can be extended with 2 module bus cards Installable module bus cards (option): ● Line card (FDnet/C-NET) FCL2001-A1 or Line card (FDnet/C-NET, P) FCL2008-A1 ● Line card (collective) FCL2002-A1 ● Line card (MS9i) FCL2003-A1 ● Line card (AnalogPLUS) FCL2005-A1 ● Line card (interactive) FCL2006-A1 ● Line card (interactive Ex) FCL2007-A1 ● I/O card (programmable) FCI2008-A1 ● I/O card (horn/monitored) FCI2009A1 ● I/O card (r
Extensions FCM2036-A2 Operating add-on (4xLED indicator) ● FCM2038-A2 Operating add-on (2xLED indicator) ● FH2002-A1 Optional operating add-ons with 96 indicator groups and two LEDs each: 1x red/green LED and 1x yellow LED Optional operating add-ons with 48 indicator groups and two LEDs each: 1x red/green LED and 1x yellow LED Housing (Standard) ● ● ● ● Empty housing for free use 430 x 398 x 165 mm E.g.
FH2004-A1 Housing (Large Extension) ● ● ● ● Empty housing for free use 430 x 398 x 265 mm E.g., for extra batteries, operating add-ons, or event printer Space for the following battery configurations: – 2x FA2007-A1 (45 Ah) or ● FH2005-A1 – 2x FA2008-A1 (65 Ah) The mounting kit for the batteries FHA2061-A1 must be ordered separately. Housing (Large) ● ● ● ● Empty housing for free use 430 x 796 x 265 mm E.g.
DL3750+ Matrix printer (external) ● ● ● ● External matrix printer recommended by Siemens Supports monitoring for printing faults Can be controlled via the RS232 module FCA2001-A1 (order separately) Can be controlled via Ethernet via the print server PS104 from SEH Use For medium-sized applications, e.g., for industrial plants, regional banks, or office complexes. As part of a modernization process, for a gradual and seamless transition from older systems to Sinteso.
Housing An FHA2007-A1 pivoting mounting plate can be fitted for the following elements above the periphery board on the rear housing panel: ● 1x fire brigade periphery module (for Germany) ● 1x sounder module (as an alternative to mounting on U-rail TS35) ● 1x Connect X200 Gateway Configuration The following software allows the system to be customized: ● SintesoWorks Operation Each control unit has an integrated operating unit.
Setup Fig. 4: Layout of FC2030 Position Designation Type Comment Items 1–6: Basic equipment. The periphery board (2 loops, P) can be ordered separately to convert the station to the 1.5 A FDnet line. Basic equipment 1 Housing (Comfort) FHA2003-A1 2 Periphery board (2 loops) FCI2002-A1 Periphery board (2 loops, P) FCI2023-A1 3 Power supply (SV 24 V-150 W) V24230-Z6-A5 4 Mains terminals on TS35 DIN rail - Space for socket, relay modules, etc.
Position Designation Type Comment 9 Event printer FTO2001-A1 For logging events 10 Key switch (Kaba) FTO2005-C1 For operating access authorization Key switch (nordic) FTO2006-B1 11 Mounting plate FHA2007-A1 e.g.
Position Designation Type Comment 19 Battery (12 V, 17 Ah, VdS) FHA2025-A1 For the emergency power supply Battery (12 V, 25 Ah, VdS) BAT12-25 For the emergency power supply 20 Fire brigade periphery module FCI2001-D1 For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 21 19" mounting kit FHA2016-A1 For installation in 19" third-party housing 22 FM blind 2HE FHA2015-A1 For recessed mounting of housing 23 License key Sx FCA20xx For special functions 24 Cable kit (communication) FCA2014-A1 For
Type Overview Housing (Comfort) Type FC2030-AA Number of FDnet addresses 756 Loops (with loop extension) or 2 (4) Stubs (with loop extension) 4 (8) Power supply 150 W Max. battery capacity 25 Ah Max.
Details for ordering Control panel Type Designation Weight Order number FC2030-AA Fire control panel (modular) 16.495 kg S54400-C2-A1 Type Designation Weight Order number FCA2001-A1 RS232 module (isolated) 0.033 kg A5Q00005327 FCA2002-A1 RS485 module (isolated) 0.027 kg A5Q00009923 FCA2005-A1 Sounder module 0.100 kg A5Q00014866 FCA2014-A1 Cable kit (communication) 0.126 kg A5Q00023027 FCI2001-D1 Fire brigade periphery module 0.
Type Designation Weight Order number compartment) FHA2007-A1 Mounting plate 0.800 kg A5Q00010151 FHA2015-A1 FM blind 2HE 5.050 kg A5Q00024621 FHA2016-A1 19" mounting kit 3.000 kg A5Q00020179 FN2001-A1 Network module (SAFEDLINK) 0.022 kg A5Q00012851 FN2002-A1 Repeater (SAFEDLINK) 0.105 kg S24236-B2502-A1 FN2006-A1 Fiber network module (SM) 0.792 kg S54400-A109-A1 FN2007-A1 Fiber network module (MM) 0.792 kg S54400-A110-A1 FTO2001-A1 Event printer 0.
Cloud Gateway Type Designation Weight Order number CXG3.X200 Connect X200 Gateway 0.300 kg S55842-Z131-A100 FCA2056-A1 Accessory kit + ACDC (X200) 0.200 kg S54400-S115-A1 FHA2063-A1 Mounting plate (X200) 0.269 kg S54400-B116-A1 Type Designation Weight Order number FA2005-A1 Battery (12 V, 17 Ah, VdS) 5.700 kg A5Q00019677 BAT12-25 Battery (12 V, 25 Ah, VdS) 7.8 kg S54302-Z102-A1 FA2007-A1 Battery (12 V, 45 Ah, VdS) 14.
Product documentation Title Document ID System documentation System description 008836 Product data 008837 Planning 008843 Mounting/Installation 008851 System data sheet FS20 – Fire detection system 008955 Data sheets FC2020 - fire control panel 009383 FC2030 - fire control panel for modernization A6V10087532 FC2040 - fire control panel 009384 FC2060 - fire control panel (modular) A6V10087844 FC2080 - fire control panel (19", modular) A6V10275515 FT2040 - fire terminal 009386 FT2080 -
Technical data Fire control panel (modular)/(modular, P) FC2030 in housing (Comfort) Supply Inputs / outputs Mains voltage AC 115 / 230 V +10/-15 % Power supply 150 W Operating voltage DC 21…28.4 V Operating current Max. 5 A Battery capacity 2x 12 V, max.
Fire control panel (modular)/(modular, P) FC2030 in housing (Comfort) ● Freely configurable inputs/outputs 8 Additional I/O cards: Interfaces Ambient conditions Mechanical data ● Programmable 12x configurable inputs/outputs 2x supply outputs 24 V ● Horn/monitored 8x horn output monitored ● RT 1x alarm relay output 1x fault relay output 1x voltage output 24 V 2x GPIO 1x fault output monitored 2x configurable output monitored Operating unit Integrated Slots for serial interfaces RS232, RS485
Fire control panel (modular)/(modular, P) FC2030 in housing (Comfort) Approvals VdS G208201 LPCB 126bn/02 FM 048514 22 Smart Infrastructure A6V10087532_n_en_-2021-10-22
Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID A6V10087532_n_en_-- Edition 2021-10-22 © Siemens Switzerland Ltd, 2007 Technical specifications and availability subject to change without notice.
