Sinteso™ Fire control panel for modernization FC2030 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso.
Features and Functions System The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information.
1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + Firewall + Virtual Private Network 8 Fire damper with actuator Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management system via BACnet, up to 16 control panels and terminals can be networked.
An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated in one network. A maximum of 64 stations is supported in total.
Control panels General features and functions ● Fast Ethernet interface for a heterogeneous network ● Processes signals from Sinteso as well as from earlier detector series ● Siemens danger management system can be connected ● Slots for RS232 and RS485 serial interfaces ● Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line ● All detector lines are monitored for ground faults. ● Mixed use of all module bus cards (line and I/O cards) possible.
Control panel-specific features FC2030-AA Housing (Comfort) FDnet detector line: ● 756 addresses ● 2 loops/4 stubs ● Can be extended with 2 module bus cards Installable module bus cards (option): ● Line card (FDnet/C-NET) FCL2001-A1 ● Line card (collective) FCL2002-A1 ● Line card (MS9i) FCL2003-A1 ● Line card (AnalogPLUS) FCL2005-A1 ● Line card (interactive) FCL2006-A1 ● Line card (interactive Ex) FCL2007-A1 ● I/O card (programmable) FCI2008-A1 ● I/O card (horn/monitored) FCI2009A1 ● I/O card (remote trans
Extensions FCM2036-A2 Operating add-on (4xLED indicator) ● FCM2038-A2 Operating add-on (2xLED indicator) ● FH2002-A1 Empty housing for free use 430 x 398 x183 mm E.g.
FH2004-A1 Housing (Large Extension) ● ● ● ● FH2005-A1 Housing (Large) ● ● ● ● FH2007-A1 Thermal printer for installation in operating units or operating add-ons Can be controlled via the RS232 module FCA2001-A1 (order separately) Logs all important events, such as alarms, faults, isolations, and test functions Matrix printer (external) ● ● ● ● Building Technologies Fire Safety Empty housing for A4 documents 430 x 398 x 183 mm Depth 150 mm Event printer ● ● ● DL3750+ Empty housing for free use 430
Use This fire control panel is ideal for medium-sized applications, e.g., for use in industrial plants, regional banks, or office complexes. Within the context of modernization, the Station allows a gradual and seamless transition from older systems to Sinteso.
Setup Layout of FC2030 Position Designation Type Comment Items 1-6: Basic equipment Basic equipment 1 Housing (Comfort) FHA2003-A1 2 Periphery board (2-loop) FCI2002-A1 3 Power supply (SV 24 V-150 W) V24230-Z6-A5 4 Mains terminals on TS35 DIN rail - Space for socket, relay modules, etc.
Position Designation Type Comment 13 Module bus cards: Line card (FDnet/C-NET) FCL2001-A1 For four extra FDnet lines Line card (collective) FCL2002-A1 For eight collective detector lines Line card (MS9i) FCL2003-A1 For two addressed MS9i detector lines Line card (AnalogPLUS) FCL2005-A1 For four addressed AnalogPLUS lines Line card (interactive) FCL2006-A1 For one addressed interactive line Line card (interactive Ex) FCL2007-A1 For one addressed interactive Ex line I/O card (programmab
Type Overview Housing (Comfort) Type Order number S54400-C2-A1 Number of FDnet addresses 756 Loops (with loop extension) or 2 (4) Stubs (with loop extension) 4 (8) Power supply 150 W Max. battery capacity 25 Ah Max.
Details for ordering Control panel Type Designation Weight Order number FC2030-AA Fire control panel (modular) 16.495 kg S54400-C2-A1 Type Designation Weight Order number FCA2001-A1 RS232 module (isolated) 0.033 kg A5Q00005327 FCA2002-A1 RS485 module (isolated) 0.027 kg A5Q00009923 FCA2005-A1 Sounder module 0.100 kg A5Q00014866 FCA2014-A1 Cable kit (communication) 0.126 kg A5Q00023027 FCI2001-D1 Fire brigade periphery module 0.
Type Designation Weight Order number FTO2005-C1 Key switch (Kaba) 0.083 kg A5Q00010113 FTO2006-B1 Key switch (nordic) 0.046 kg A5Q00010129 Z3B171 Relay module 250 V AC / 10 A (1 relay) 0.042 kg 4843830001 Weight Order number Auxiliary power supply Type Designation FP2004-A1 1.286 kg Power supply kit (150 W, A) for EN-compliant installation in empty housing A5Q00020825 FP2005-A1 Power supply kit (150 W, B) for extension 1.
External printer Type Designation Weight Order number DL3750+ Matrix printer (external) 7.300 kg A5Q00023962 - Color ribbon for matrix printer DL3750+ 0.
Technical data FC2030 in the housing (Comfort) Supply Mains voltage AC 115/230 V +10/-15 % Power supply 150 W Operating voltage DC 21…28.4 V Operating current Max. 5 A Battery capacity 2x 12 V, 7…25 Ah Battery monitoring Yes Network monitoring Yes Inputs / outputs Connectable detector series Sinteso Collective detectors which can be connected MS7/9/24, DS11, Synova 600, SIGMACON Other addressable detectors which can be connected MS9i, interactive, AnalogPLUS Number of addresses Max.
FC2030 in the housing (Comfort) Additional I/O cards: ● Programmable 12x configurable inputs/outputs 2x supply outputs 24 V ● Horn/monitored 8x horn output monitored ● RT 1x alarm relay output 1x fault relay output 1x voltage output 24 V 2x GPIO 1x fault output monitored 2x configurable output monitored Interfaces Operating unit Integrated Slots for serial interfaces RS232, RS485 2 Slots for network modules 2 Slot for loop extension 1 Slots for module bus cards (on integrated card cage) 2 M
09 0786 Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 008836 FC2030 - Control and Indicating Equipment incl. SV24V150W - 150W/24VDC Power Supply Equipment for use in fire detection and fire alarm systems installed in buildings.
Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 20 Building Technologies Fire Safety Document ID A6V10087532_m_en_-Edition 2018-09-28 © Siemens Switzerland Ltd, 2007 Technical specifications and availability subject to change without notice.