User Manual
6
Building Technologies
A6V10087532_m_en_
--
Fire Safety 2018-09-28
Control panels
General features and functions
● Fast Ethernet interface for a heterogeneous network
● Processes signals from Sinteso as well as from earlier detector series
● Siemens danger management system can be connected
● Slots for RS232 and RS485 serial interfaces
● Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line
● All detector lines are monitored for ground faults.
● Mixed use of all module bus cards (line and I/O cards) possible.
● Integrated degraded mode function
● Freely configurable, time-dependent controls with optional weekly switching programs
● Time and situation-dependent changeover of detector parameter sets
● Controls for synchronous activation of sounders / sounder bases with signal sound,
flash, and voice output
● The control panel and the fire detection system are custom-configured using the
'SintesoWorks' software
● Firmware for all processor-controlled control panel components can be updated
● Customer texts can be adapted directly on the operating unit of the control panel or with
the 'SintesoWorks' software
● Up to 13000 events can be called up from the event memory and filtered based on
various criteria
● Automatic summer/normal time changeover