Manualshelf

User Manual

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel
12
EPD - Type II
Based on ISO 14021
S54392-C5-A1 FC2040-CL Fire control panel (exting.)
Product line
Siemens Schweiz AG
Building Technologies Division
Theilerstrasse 1a
6300 Zug - CH
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
OHSAS 18001 (OH&S) 01.01.2011 SQS
Maintenance
Fire load 85MJ
20-PAP Corrugated fiber board
Packaging to rear (large) and drilling gauge
1'700g
22-PAP paper Enclosed notes 49g
20-PAP Corrugated fiber board Packaging to cover cap (2x) and operating unit + insert 50g
20-PAP Corrugated fiber board Folding box to conn. Module 33g
Polyester, Polyethylene, Aluminum Shielding bags 9g
PU PU-Foam 152g
4-LDPE Protection foils (hounsing, cover cap, plane compartment) 27g
4-LDPE
PE-bags
2g
Total weight of device 23'653g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
ABS+PC; halogenated Cover cap (2x) 1'286g
PES Inscription strips (2x) 18g
PES Design foil to operating unit / Foil to plan compartment 83g
PVC rigid; halogenated Edge protection (L=95mm) / Flat cable mounting (5x) / Pipe 45g
Q Silicone rubber; halogenated FCM2012-A1 Keypad / FTO2004-C1 Keypad 307g
Chloroprene Edge Protection Profile (Trapezium / Rectangle) 47g
Mylar, boPET Insulation sheet to power supply 14g
ABS
Mounting plate self adhesive (3x)
2g
PC; GF 0%
Card guides to FCA2046-A1 (2x) 14g
PMMA Holder to linecards for XCI2003-A1 2g
PA Nylon-plugs / Cable straps (18x) / Mounting rail end piece 15g
EPDM Pole protective caps 27g
PA Cover plate orange/grey (6x) 22g
Steel; zinc plated, powder coated Rear cpl (Large) 11'850g
Steel; zinc plated Support to operating unit (Option) / Hat mounting rails 1'276g
Steel; zinc plated, powder coated Front sheet metal to plan compartment 1'083g
Materials
Packaging
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Plastics
Product
Environmental
Product Declaration
Type of equipment /
Product No.
FS20
Page 1/2

Summary of content (2 pages)