User Manual

EPD - Type II
Based on ISO 14021
Steel; zinc plated, powder coated Door to plan compartment 999g
CuZn; nickel plated Key lock cpl. (2x) 170g
Steel; zinc plated Screws for housing / plan compartment / accessoire 82g
Steel; zinc plated, powder coated
Rear of plan compartment
1'060g
CuNiZn Keys for the lock (4x) 44g
Steel; zinc plated Screws to operating unit / retaining spring 31g
Steel CrNi Shielding plate PMI / Schlauchbride CS 11 48g
Al Housing to power supply / Aluminium patch tap D45 414g
Steel CrNi Fastening angle to power supply 27g
Steel; zinc plated Rail bracket / Mount. plate FHA2019-A1 / FCA2046-A1 1'780g
SMnPb Hexagon Stand off (3x) 4g
Steel CrNi; zinc plated Shielding plate to XCI2003-A1 53g
Steel; Steel
Spacer M3x16 to XCI2001-A1 (2x) 6g
PBT GF, Be/Cu, PVC Ribbon cable 34 pol. L=670 / Ribbon cable 20 pol. L=47 42g
PVC, Cu Control wire LIYY to power supply 10g
PBT, PVC, Cu, CrNi Cable-kit to FC2060-CC 236g
PBT, PVC, Cu, CrNi other cables 74g
PA 66, CuZn, CuSn, CrNi PCB-connectors to FCA2046-A1 71g
PA, Cu CrNi Relay modules 577g
PA 66 GF, PC, CuZn Power Socket 79g
FR4; TBBA; solder SnAgCu FCM2027 PMI- & Mainboard 358g
FR4; TBBA; solder SnAgCu PCB cpl. FTO2004-C1 FBA terminal 48g
FR4; TBBA; solder SnAgCu FCC2006-A1 CPU Modul 18g
FR4; TBBA; solder SnAgCu FCI2004-A1 Periphery board 300g
FR4; TBBA; solder SnAgCu PCB assembled to power supply 648g
FR4; TBBA; solder SnAgCu PCB assembled to FCA2046-A1 142g
FR4; TBBA; solder SnAgCu PCB assembled to XCI2003-A1 226g
FR4; TBBA; solder SnAgCu PCB assembled to FCA2006-A1 15g
FR4; TBBA; solder SnAgCu PCB assembled to FCA2006-A1 15g
Capacitors > 12 cm³
on PCB assembled to power supply (2x)
(46g)
Transformator
on PCB assembled to power supply (2x)
(360g)
Comments
A5Q00067090D-02-78 04.12.2018
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent
under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Others
PCBAs (Printed Circuit Board
assembled)
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
Regulation (EC) No. 1907/2006 (REACH)
Special components
(part of the assembled PCB)
Page 2/2