User Manual

ManualsBrandsSiemens ManualsFire - ModernizationSinteso – phased modernization Planning Tools

A6V10087844_n_en_-- Building Technologies

2018

Control Products and Systems

Sinteso™

Fire control panel (modular)

FC2060

Modular, pre

assembled fire control panel with integrated, user

friendly operating unit

for gradual migration to Sinteso.

● Fire control panel for a maximum of 1512 addresses

● Can be used as a standalone version or networked with up to 64 stations, such as

control panels and terminals

● Redundant network node with degraded mode operation according to EN 54

● Emergency power supply for emergency operating time of up to 72 hours

● Detection and automatic importing (auto-configuration) of all FDnet devices, ready

for operation immediately

● Flexible configuration of complex applications and controls

● Configuration data can be uploaded/downloaded via remote access

● Extensions: Printer, key switches, LED indicators

● Card cage for additional module bus cards (line and I/O cards)

● Hot plug system: Module bus cards can be changed during operation

● Time and situation-dependent changeover of detector parameter sets

Summary of content (18 pages)

PAGE 1
Sinteso™ Fire control panel (modular) FC2060 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso.
PAGE 2
Features and Functions System The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information.
PAGE 3
1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + Firewall + Virtual Private Network 8 Fire damper with actuator Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
PAGE 4
Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management system via BACnet, up to 16 control panels and terminals can be networked.
PAGE 5
An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated in one network. A maximum of 64 stations is supported in total.
PAGE 6
Control panels General features and functions ● Fast Ethernet interface for a heterogeneous network ● Processes signals from Sinteso as well as from earlier detector series ● Siemens danger management system can be connected ● Slots for RS232 and RS485 serial interfaces ● Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line ● All detector lines are monitored for ground faults. ● Mixed use of all module bus cards (line and I/O cards) possible.
PAGE 7
Control panel-specific features FC2060-AA Housing (Large) FDnet detector line: ● Max.
PAGE 8
FH2004-A1 Housing (Large Extension) ● ● ● ● FH2005-A1 Housing (Large) ● ● ● ● FTO2001-A1 Thermal printer for installation in operating units or operating add-ons Can be controlled via the RS232 module FCA2001-A1 (order separately) Logs all important events, such as alarms, faults, isolations, and test functions Matrix printer (external) ● ● ● ● 8 Building Technologies FireSafety Empty housing for free use 430 x 796 x 283 mm E.g.
PAGE 9
Use This fire control panel is ideal for large applications, e.g., for use in industrial plants, office complexes, or production halls. Within the context of modernization, the Station allows a gradual and seamless transition from older systems to Sinteso.
PAGE 10
Setup Layout of FC2060 Position Designation Type Comment Items 1-6: Basic equipment Basic equipment 1 Housing (Large) FHA2005-A1 2 Periphery board (4 loops) FCI2004-A1 3 Power supply (SV 24 V-150 W) V24230-Z6-A5 4 Mains terminals on TS35 DIN rail - Space for socket, relay modules, etc.
PAGE 11
Position Designation Type Comment Extensions 8 Relay module Z3B171 Relay for fire controls 9 Event printer FTO2001-A1 For logging events 10 Key switch (Kaba) FTO2005-C1 For operating access authorization Key switch (nordic) FTO2006-B1 11 Mounting plate FHA2007-A1 E.g.
PAGE 12
Type Overview Housing (Large) Type Order number A5Q00023048 Number of FDnet addresses 1512 Loops (with loop extension) or 4 (8) Stubs (with loop extension) 8 (16) Power supply 150 W Max. battery capacity 45 Ah Max.
PAGE 13
Details for ordering Fire terminals Type Designation Weight Order number FC2060-AA Fire control panel (modular) 21.143 kg A5Q00023048 Type Designation Weight Order number FCA2001-A1 RS232 module (isolated) 0.033 kg A5Q00005327 FCA2002-A1 RS485 module (isolated) 0.027 kg A5Q00009923 FCA2005-A1 Sounder module 0.100 kg A5Q00014866 FCA2014-A1 Cable kit (communication) 0.126 kg A5Q00023027 FCI2001-D1 Fire brigade periphery module 0.
PAGE 14
Auxiliary power supply Type Designation Weight Order number FP2004-A1 1.286 kg Power supply kit (150 W, A) for EN-compliant installation in empty housing A5Q00020825 FP2005-A1 Power supply kit (150 W, B) for extension 1.181 kg A5Q00018779 Network (backbone) Type Designation Weight Order number FCA2031-A1 Connection module (MoNet) 0.081 kg incl. cable S54400-A153-A1 FHA2029-A1 Mounting kit (switch) 1.261 kg S54400-B79-A1 FN2012-A1 Ethernet switch (modular) 0.
PAGE 15
Product documentation Title Document ID System documentation System description 008836 Product data 008837 Planning 008843 Mounting/Installation 008851 Data sheets FC2020 - fire control panel 009383 FC2030 - fire control panel for modernization A6V10087532 FC2040 - fire control panel 009384 FC2060 - fire control panel (modular) A6V10087844 FC2080 - fire control panel (19", modular) A6V10275515 FT2040 - fire terminal 009386 FT2080 - fire terminal (Touch) A6V10378271 Fire detection syste
PAGE 16
Technical data FC2060 in the housing (Large) Supply Mains voltage AC 115/230 V +10/-15 % Power supply 150 W Operating voltage DC 21…28.4 V Operating current Max. 5 A Battery capacity 2x 12 V, 45 Ah Battery monitoring Yes Network monitoring Yes Inputs / outputs Connectable detector series Sinteso Collective detectors which can be connected MS7/9/24, DS11, Synova 600, SIGMACON Other addressable detectors which can be connected MS9i, interactive, AnalogPLUS Number of addresses Max.
PAGE 17
FC2060 in the housing (Large) Additional I/O cards: ● Programmable 12x configurable inputs/outputs 2x supply outputs 24 V ● Horn/monitored 8x horn output monitored ● RT 1x alarm relay output 1x fault relay output 1x voltage output 24 V 2x GPIO 1x fault output monitored 2x configurable output monitored Interfaces Operating unit Integrated Slots for serial interfaces RS232, RS485 2 Slots for network modules 2 Slots for loop extension 2 Slots for module bus cards (on integrated card cage) 5 Mo
PAGE 18
Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 008836 FC2060 - Control and Indicating Equipment incl. SV24V150W - 150W/24VDC Power Supply Equipment for use in fire detection and fire alarm systems installed in buildings.