Sinteso™ Fire control panel (19", modular) FC2080 Individually configurable, modular fire control panel without integrated operating unit, can be mounted in 19" pedestal cabinet.
Features and Functions System The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information.
1 Remote access with SintesoView/ Sinteso Touch 2 FS cloud applications 3 Customer network 4 Management platform 5 Remote access to management platform 6 Remote access with Sinteso Mobile 7 Router + Firewall + Virtual Private Network 8 Fire damper with actuator Transmission of a fault signal Transmission of an alarm signal You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'.
Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management system via BACnet, up to 16 control panels and terminals can be networked.
An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated in one network. A maximum of 64 stations is supported in total.
Control panels General features and functions ● System with multiple redundancy ● Optionally available with redundant main processor ● Automatic recognition and addressing of module bus cards ● Turbo isolation in the event of a short-circuit to ensure uninterrupted availability of FD20 devices ● Processes signals from Sinteso as well as from earlier detector series ● Siemens danger management system can be connected ● Supplied with the following pre-fitted interfaces: – 2x integrated FCnet interfaces – 1x s
Control panel-specific features FH2080-AA Housing (19" pedestal cabinet) ● ● ● ● ● ● ● ● 5000 addresses 30...240 lines (depending on line card and configuration) Max. 2 power supply units at 300 W; can be extended to 450 W Max. battery capacity 100 Ah per power supply unit Max. 7 card cages for module bus cards Max. 5 module bus cards per card cage Max. 37 module bus cards Max. 8 flooding zones; max.
Extensions You will find information on the integrated extinguishing system and the individual extinguishing components that are available in a separate data sheet with the document ID 'A6V11480005'.
FCM2036-A2 Operating add-on (4xLED indicator) ● FCM2038-A2 Operating add-on (2xLED indicator) ● FTO2001-A1 Thermal printer for installation in operating units or operating add-ons Can be controlled via the RS232 module FCA2001-A1 (order separately) Logs all important events, such as alarms, faults, isolations, and test functions Matrix printer (external) ● ● ● ● Building Technologies Fire Safety Optional operating add-on with 48 indicator groups with one red/green + one yellow LED each Event printe
Use This fire control panel is ideal for large applications with high redundancy requirements, such as airports, power generation facilities, and systems with extinguishing systems. Within the context of modernization, the Station allows a gradual and seamless transition from older systems to Sinteso. Design Function elements Processor unit The basic module of the FC2080 is delivered pre-mounted on a 19" carrier.
Setup Layout of FC2080 Position Designation Type Comment Basic equipment 1 Housing (19" pedestal cabinet) FH2080-AA 19" pedestal cabinet for accommodating FC2080 components 2 Processor unit (19", FC2080) FCC2002-A1 Basic module incl.
Position Designation Type Comment 8 Card cage (5 slots) FCA2008-A1 For mounting on carrier (19", card cage) to allow extension through the addition of any five module bus cards 9 Carrier (19", power supply) FHA2022-A1 For use as an additional 2nd power supply module with separate batteries 10 Carrier (19", option) FHA2024-A1 For mounting options (e.g., FDCIOxxx, relays) in the 19" cabinet 11 Module bus cards: Line card (FDnet/C-NET) FCL2001-A1 For four FDnet lines (max.
Type Overview Housing Type Order number Number of FDnet addresses Lines Power supply Max. battery capacity Building Technologies Fire Safety FH2080-AA S54400-C103-A1 5000 30...240 (depending on line card and configuration) Max. 2x 450 W Max. 2x 12 V, 100 Ah Number of module bus cards in the card cage Max. 5 Total number of module bus cards Max.
Details for ordering Basic equipment Type Designation Weight Order number FH2080-AA Housing (19" pedestal cabinet) 120.000 kg S54400-C103-A1 FCC2002-A1 Processor unit (19", FC2080) incl. 4.600 kg CPU card (FC2080) and communication card (FC2080) S54400-B17-A1 FHA2022-A1 Carrier (19", power supply) S54400-B24-A1 1.
Type Designation Weight Order number FN2007-A1 Fiber network module (MM) 0.792 kg S54400-A110-A1 FTO2001-A1 Event printer 0.141 kg A5Q00010126 - Spare printer reels (10 reels) 0.090 kg A5Q00017619 FTO2005-C1 Key switch (Kaba) 0.083 kg A5Q00010113 FTO2006-B1 Key switch (nordic) 0.046 kg A5Q00010129 SDA3000 Key safe adapter 1.500 kg 9102.0648 Auxiliary power supply Type Designation Weight Order number FHA2022-A1 Carrier (19", power supply) 1.
Product documentation Title Document ID System documentation System description 008836 Product data 008837 Planning 008843 Mounting/Installation 008851 Data sheets FC2020 - fire control panel 009383 FC2030 - fire control panel for modernization A6V10087532 FC2040 - fire control panel 009384 FC2060 - fire control panel (modular) A6V10087844 FC2080 - fire control panel (19", modular) A6V10275515 FT2040 - fire terminal 009386 FT2080 - fire terminal (Touch) A6V10378271 Fire detection syste
Technical data FC2080 inside 19" housing Supply Mains voltage AC 115/230 V +10/-15 % Power supply >150 W Operating voltage DC 21…28.4 V Operating current >3 A Battery capacity 2x 12 V, max. 100 Ah Battery monitoring Yes Network monitoring Yes Inputs / outputs Connectable detector series Sinteso, collective, MS9i, DS11 Number of addresses Max. 5000 Number of lines in the maximum configuration: ● FDnet (4 per line card) Max. 120 ● Collective (8 per line card) Max.
FC2080 inside 19" housing Mechanical data Dimensions (W x H x D): Pedestal cabinet incl. base 600 x 2200 x 600 mm Protection category (IEC 60529) IP30 Color ~RAL 7035 light gray Standards and approvals VdS G212027 Standards EN 54-2, EN 54-4, VdS 2095 Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 008836 FC2080 - Control and Indicating Equipment incl. SV24V150W - 150W/24VDC Power Supply Equipment for use in fire detection and fire alarm systems installed in buildings.