User Manual

ManualsBrandsSiemens ManualsFire - Addressable Stand-alone PanelsAuto-addressing analogue fire detection panel

Building Technologies

Fire Safety & Security Products

FC330A

Synova

Auto-addressing analogue fire

detection panel

z Two-loop addressable panel, expandable to 4 loops

z Optional 4 or 12 conventional lines (e.g. for retrofit, modernization)

z Commissioning in record time by auto-addressing localization

z Auto-addressing eliminates the setting of dip switches, etc.

z Automatic localization of interruptions and short circuits

z Unshielded cables prevent irksome ground-returns

z Periodic self-test facility

z Serial interface for third-party building management systems, repeaters,

printer, etc.

z Additional cards may be retrofitted at anytime for customized solutions

z Maintenance can be matched to customer needs

Summary of content (8 pages)

PAGE 1
FC330A SynovaTM Auto-addressing analogue fire detection panel z Two-loop addressable panel, expandable to 4 loops z Optional 4 or 12 conventional lines (e.g. for retrofit, modernization) z Commissioning in record time by auto-addressing localization z Auto-addressing eliminates the setting of dip switches, etc.
PAGE 2
Product features The FC330A has all the requirements for intelligent systems. Addressing is automatic and address allocation takes only seconds. To improve security and increase speed, distributed intelligence enables detectors to verify danger signals independently. 512 addressable and 384 conventional fire detectors, regardless of type, may be connected to the FC330A fire control panel.
PAGE 3
System overview 3 Building Technologies Fire Safety & Security Products
PAGE 4
FC330A and its expansions [5] K3M010 4 conventional lines expansion card [4] K3M030 2-loop addressable expansion card [11] Z3B171 Relay module or [6] K3M020 12 conventional lines expansion card [1] FC330A Control panel [12] Z3I1000 Power supply (up to 2 cards) (up to 16 Z3B171) TS32 U-rail [2] Z3S030 Z3S020 [3] K3X020 Master board Two RS232 ports (up to 2 cards) [10] Z3I830 Mounting plate [9] K3I080 RS232/LON-Bus converter [7] K3G050 Relay card or [8] K3L070 VdS interface card 4 Building Tech
PAGE 5
FC330A and its expansions (continued) [1] Fire control panel FC330A-… The fire control panel accommodates – Smoke, heat and multi-sensor detectors and manual call points from different series – Special detectors (flame detectors, Exdetectors, highly sensitive detectors) for special applications – Input and output modules – Conventional line modules and siren outputs The fire control panel is equipped with state-of-the-art software; virtually unlimited range of applications may be programmed easily.
PAGE 6
FC330A (two-loop) and its expansions (continued) [9] LON-bus converter card K3I080 The K3I080 LON-bus converter card is used to connect to the control panel with various LON-bus applications: – Floor repeater panels – Floor or situational plans – LED parallel indications – Various input and output signal possibilities Converter cards on the LON-bus make numerous user-oriented solutions possible.
PAGE 7
Technical data Type Current consumption for FC330A Operation current Alarm current Type Current consumption for FC330A Operation current Alarm current K3X020 K3M010 K3M020 K3M030 K3G050 128 mA 1) 2) +9 mA 3) <72 mA +40 mA 4) 2 mA 1) 2) 0 mA 20 mA +9 mA 3) K3L070 <25 mA +40 mA 4) +9 mA 3) K3I080 Z3B171 B3R080 12 mA +40 mA 10 mA 0 mA 7) 0 mA +27 mA 2 mA +6 mA 6) 1) Each loop without any devices consumes additional 14 mA 2) 0.
PAGE 8
Details for ordering Type FC330A-1 FC330A-2 FC330A-2-CH FC330A-4 FC330A-5 FC330A-6 FC330A-NL FCA… Options for FC330A-2 Accessories Expansion B3R080 H23B030 Z3S020 Z3S030 Z3I830 Z3B171 F02F290 TS35 TKU2 K3M010 K3M020 K3M030 K3G050 K3I080 K3L070 Z3I1000 Z3I1020 Siemens Switzerland Ltd Building Technologies Group International Headquarters Fire Safety & Security Products Gubelstrasse 22 CH-6301 Zug Tel. +41 41 724 24 24 Fax +41 41 724 35 22 www.sbt.siemens.com Document no. 007408_e_en_-- Edition 04.