Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsEC Declaration - FDOOT241-9

Sinteso™

Detector base and accessories

FDB22x, FDB20x, FDB2x1-AA, DBZ1190-Ax, FDBZ295, FDBZ291, DBZ1193A, FDBH291,

FDBZ293, FDB2x1, FDB29x, FDUD290, DBZ1194, FDBZ294, FDZ291

Adressed (FDnet), collective

● Base made from impact-resistant and scratch-resistant plastic

● Screwless connection terminals enable connection without any tools (spring clip

principle)

● FDB2x1-AA incl. 1micro terminal

● Completely covered by detector

● FDB201, FDB201-AA, FDB221, FDB221-AA for recess-mounted or surface-moun-

ted cable entry

● FDB202, FDB222 for flush mounting

● Accessories for surface mounting, in humid or wet environments, theft protection,

impact protection, dust protection, location inscription, and detector heating unit

when there is a risk of moisture condensation or icing, seal for higher protection

Summary of content (16 pages)

PAGE 1
Sinteso™ Detector base and accessories FDB22x, FDB20x, FDB2x1-AA, DBZ1190-Ax, FDBZ295, FDBZ291, DBZ1193A, FDBH291, FDBZ293, FDB2x1, FDB29x, FDUD290, DBZ1194, FDBZ294, FDZ291 Adressed (FDnet), collective ● ● ● ● ● ● ● ● 007775_r_en_-2021-01-08 Base made from impact-resistant and scratch-resistant plastic Screwless connection terminals enable connection without any tools (spring clip principle) FDB2x1-AA incl.
PAGE 2
Properties Features ● Universal base suitable for surface-mounted and recess-mounted supply lines ● Extra-long mounting slits allow existing drill holes from older systems to be reused ● A large opening in the detector base makes it easy to feed the cables through ● The detector line can be connected without any tools: The wire can be inserted easily by hand ● Loop contact ● Space for auxiliary terminals, for the connection of two alarm indicators, cable shielding, or the connection of a detector heating un
PAGE 3
Use Collective detector base FDB201 / FDB201-AA Function: ● Detector base with stilts for fire detectors with collective signal processing 2 ● 'Gray' connection terminals, 0.2…1.
PAGE 4
● ● Base height: 17 mm When using the point detector: 49 mm 2 Mounting slits 3 Loop contact 4 Screwless connection terminals 5 Opening for cable entry DBZ1190-AA micro terminal and DBZ1190-AB connection terminal ● Micro terminal DBZ1190-AA ● – Cable cross section up to max. 0.5 mm² Connection terminal DBZ1190-AB – Cable cross section up to max. 2.
PAGE 5
Detector heating unit FDBH291 ● ● ● ● For operating point detectors in critical ambient conditions during icy conditions or when there is a danger of moisture condensation. Examples of application: Cold stores, attics, loading ramps, cheese cellars Optimum function is only guaranteed in conjunction with base attachment wet FDB295 or base attachment humid FDB293.
PAGE 6
1 2 1 Set screw 2 Allen key Base attachment FDB291 Function: ● For routing surface-mounted cables larger than Ø 6 mm ● Detector base is secured with a snap fastener 1 2 3 120 6 Smart Infrastructure 1 ● ● Base height: 25 mm When using the point detector: 60 mm 2 Opening for cable entry 3 Mounting slits 007775_r_en_-2021-01-08
PAGE 7
Base attachment humid FDB293 ● ● ● ● ● ● For achieving a higher protection category For mounting in wet or humid environments Required when using detector heating unit FDBH291 Required when using protective cage DBZ1194 or EMC-protective cage FDBZ294 Mounted between detector base and ceiling Detector base mounted quickly: The detector base simply clicks into place in base attachment humid FDB293.
PAGE 8
Base adapter FDB251 Function: ● For adapting Interactive for Sinteso detector systems ● Can be set with jumper on replaced detector 1 2 3 1 DB1151A detector base (interactive) 2 ● ● 3 Adapter incl. detector base, 'orange' connection terminals Base height: 29.5 mm When using the point detector: 74.5 mm Base adapter FDB281 Function: ● For adapting MS8/PMT for Sinteso detector systems 1 2 3 8 Smart Infrastructure 1 Detector base Z84 (MS8/PMT) 2 ● ● 3 Adapter incl.
PAGE 9
Base adapter FDB299 Function: ● For adapting AlgoRex (collective) and SIGMACON for Sinteso detector systems 1 2 3 1 ● ● DB1101A detector base (collective, AlgoRex) SPF600 detector base (SIGMACON) 2 ● ● Base height: 29.5 mm When using the point detector: 74.5 mm 3 Adapter incl.
PAGE 10
1 2 3 4 1 Detector base 2 Base adapter FDB241, FDB251 or FDB299 3 FDUD290 removal tool for adapter 4 ● ● ● FDUD291 detector exchanger FDUD292 Detector exchanger and tester FDUD293 intelligent detector tester Protective cage DBZ1194 ● ● 10 Smart Infrastructure To protect the point detector from damage Can only be mounted in combination with the base attachment humid FDB293 or base attachment wet FDB295 007775_r_en_-2021-01-08
PAGE 11
1 2 3 158.
PAGE 12
1 2 12 Smart Infrastructure 1 Point detector 2 Detector dust cap FDZ291 007775_r_en_-2021-01-08
PAGE 13
Type Overview Type Designation Order no. Weight [kg] FDB201 Detector base collective A5Q00003814 0.026 FDB202 Collective detector base, flat S54319-F3-A1 0.025 FDB201-AA Collective detector base incl. 1 micro terminal DBZ1190‑AA A5Q00012742 0.029 FDB221 Detector base, addressable A5Q00001664 0.026 FDB222 Addressable detector base, flat S54319-F1-A1 0.025 FDB221-AA Detector base, addressable incl. 1 micro terminal DBZ1190‑AA A5Q00012741 0.
PAGE 14
Technical data Detector base Conductor cross-sections: ● Connection terminals in the base 0.2…1.5 mm 2 ● Connection terminals DBZ1190-AB 0.5…2.5 mm 2 ● Micro terminals DBZ1190-AA 0.28…0.
PAGE 15
Dimensional drawings FDB2x1 / FDB2x1-AA, FDB202 / FDB222 4.3 min. 46 B max. 79 A FDB241 max. 4 mm 90 22 17 115 38 FDB251 115 FDB281 117 38 41 120 4.3 FDB291 max. 4 mm min. 46 max. 90 26 FDB293 53 135 107.8 13.2 13.2 107.8 14 107.8 107.8 141 135 13.2 14 14 141 7. 5 14 13.2 5 4.
PAGE 16
FDB295 135 61 107.8 13.2 13.2 107.8 14 107.8 107.8 135 135 13.2 14 14 135 7. 5 14 13.2 5 4. FDB299 DBZ1194 126 158.5 115 142 161.7 38 FDBZ294 Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID 007775_r_en_-- Edition 2021-01-08 © Siemens Switzerland Ltd, 2007 Technical specifications and availability subject to change without notice.