User Manual

2
Smart Infrastructure A6V10725075_en--_d
2019-10-25
Properties
● Devices and bases are available in two colors:
– Red (~RAL 3000 flame red)
– White (~RAL 9010, pure white)
● Integrated line separator
● The device automatically monitors its beacon and acoustic function.
● Tool-free connection to the detector line. Possible conductor cross-sections to 2.5 mm
2
.
● Max. protection category achievable: IP65 for use with base deep FDB227-x and
M20 x 1.5 metal cable gland with M20 x 1.5 counter nut.
● Synchronization of acoustic and beacon signals as well as voice messages (voice
messages only for FDS225-x and FDS227-xx as well as FDS227-xx-C)
● By setting the appropriate tone, it can be used as a break bell in schools or plants.
● For FDS225-x, FDS227-xx, and FDS227-xx-C: Simple configuration of the voice
messages with the configuration software for the respective fire detection system:
– 'SintesoWorks' for the 'Sinteso' product line
– 'Cerberus-Engineering-Tool' for the 'Cerberus PRO' product line
● Protected electronics and high-quality components
● Eco-friendly
– Environmentally friendly processing
– Reusable materials
– Electronic parts and synthetic materials can be easily separated
Use
● Public buildings
● Office buildings
● Hotels
● Schools and kindergartens
Intended use
The devices FDS224-x, FDS225-x, FDS226-xx, FDS227-xx, and FDS227-xx-C are intended
to be used as alarm devices on an FDnet/C-NET detector line in connection with a fire
control panel FC20xx ('Sinteso' product line) or FC72x ('Cerberus PRO' product line).