Data Sheet for Product

2
Smart Infrastructure A6V10405166_f_en_--
Fire Safety 2019-05-03
Functions
● The air sampling smoke detection kit is a passive monitoring system without a fan of its
own. It uses the pressure differences within the ventilation system to continuously take
air samples from the ventilation duct via the air flow tube and supply them to the air
sampling smoke detection kit.
● The air sampling smoke detection kit works only if the ventilation system is in operation
and the air in circulation.
● The air to be monitored must usually be clean, i.e. free of dust and aerosols.
● If the smoke detector detects a certain concentration of smoke, the corresponding
danger level is reported to the fire control panel which, in turn, triggers an alarm.
Design
Design
The air sampling smoke detection kit consists of the following components:
● Air duct sampling chamber (gray plastic housing with a transparent cover)
– End plug for the air flow tube
– Screws for installing the detector base
– Screws for installing the air duct sampling chamber
– Smoke cap
– Plastic cable gland
– Plastic counter nut
Air duct sampling chamber End plug Smoke cap
Plastic cable gland M20 x 1.5 Plastic counter nut M20 x 1.5
The point detector and detector base listed must be ordered separately.
Sinteso Cerberus PRO
Base Detector Base Detector
FDB222
FDB202
FDOOT241-A9 DB110
DB721
DB721D
OOH740