User Manual

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsDeclaration of Performance - FDM223H

008345_s_en_-- Smart Infrastructure

2019

Sinteso

™

Cerberus

™

PRO

Manual call point

FDM223H, FDM224H

'Heavy Duty' manual call point addressed (FDnet/C

NET)

● Manual call points for addressed Sinteso FS20 and Cerberus PRO FS720 fire

detection systems

● Very robust housing design made from fiberglass-reinforced thermoplast

● For surface mounting in humid, wet and dusty environments

● Manual call point FDM223H with indirect activation: type 'B' according to EN 54-11

● Manual call point FDM224H with direct activation: type 'A' according to EN 54-11

● Two-wire installation for all cable types

● Communication via FDnet/C-NET (addressed individually)

Summary of content (6 pages)

PAGE 1
Sinteso™ Cerberus™ PRO Manual call point FDM223H, FDM224H 'Heavy Duty' manual call point addressed (FDnet/C-NET) ● ● ● ● ● ● ● 008345_s_en_-2019-10-16 Manual call points for addressed Sinteso FS20 and Cerberus PRO FS720 fire detection systems Very robust housing design made from fiberglass-reinforced thermoplast For surface mounting in humid, wet and dusty environments Manual call point FDM223H with indirect activation: type 'B' according to EN 54-11 Manual call point FDM224H with direct activation: ty
PAGE 2
Properties Features ● Integrated line separator: The defective part on the detector line is located by the fire control panel and isolated between two FDnet/C-NET devices.
PAGE 3
Manual call point FDM224H ● Direct alarm activation by pushing in the glass insert ● Open the door of the detector with the key to replace the glass insert. The alarm button is reset when the door is closed. ● Protective cover DMZ1197-AC (accessories) protects the manual call point against the glass being broken accidentally.
PAGE 4
Product documentation Document ID Name 008164 Equipment overview Sinteso™ Detector system FD20 008331 List of compatibility (for 'Sinteso™' product line) A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line) 007002 Technical manual Manual call points FDM223, FDM224, FDM223H, FDM224H 008615 Installation Housing for manual call point 'Heavy Duty' FDMH292-R Related documents such as environmental declarations, CE declarations, etc.
PAGE 5
Technical data FDM223H/FDM224H Operating voltage DC 12…33 V Operating current (quiescent) 200 µA Ext. alarm indicator (AI) 2 Operating temperature -25…+70°C Storage temperature -30…+75°C Air humidity (no moisture condensation) ≤95 % rel. Communication protocol FDnet/C-NET Conductor cross section 0.28…1.
PAGE 6
Dimensional drawings Manual call point FDM223H/FDM224H 42.5 134.3 134.3 08 0786 FDM223H Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 007002 FDM223H - Manual callpoint incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.