EC Deklaration
MED-SMOKE-DET / V07 1
s
EC Declaration of Conformity
EG Konformitätserklärung
No. MED-SMOKE-DET
Manufacurer: Siemens Schweiz AG
Hersteller: Theilerstrasse 1a
6300 Zug / Switzerland
Product description: Smoke Detectors:
Produktbezeichnung: Rauchmelder:
• FDO221 Smoke Detector with Short-Circuit Isolator
• FDOOT221 Multisensor Detector (Point detector with two additional heat sensors) with Short-Circuit Isolator
• FDO241 Smoke Detector with Short-Circuit Isolator
o Compatible Base Attachment: FDB291
o Compatible Base Attachment Wet: FDB295
o Compatible Base Attachment Wet with Sealing: FDB293
o Compatible Detector Base Addressable: FDB221; FDB222
o Can be used addressed on the FD- Net of Sinteso® fire control panels FC2020-AA; FC2020- AE; FC2040-AA;
FC2040-AE.
• FDOOT241-A9 Multisensor Detector (Point detector with two additional heat sensors) with
Short- Circuit Isolator
o Compatible Base Attachment: FDB291
o Compatible Base Attachment Wet: FDB295
o Compatible Base Attachment Wet with Sealing: FDB293
o Compatible Detector Base Addressable: FDB221; FDB222
o Compatible Detector Base Collective: FDB201; FDB202
o Can be used addressed on the FD-Net of Sinteso® fire control panels FC2020-AA; FC2020- AE; FC2040-AA;
FC2040-AE and collective, if connected to the Transponder FDCIO223 on the FD-Net of Sinteso® fire control
panels.
• FDOOT241-A9-Ex Multisensor Detector Ex (Point detector with two additional heat sensors) with Short-Circuit Isolator
o Compatible Base Attachment: FDB291
o Compatible Base Attachment Wet with Sealing: FDB293; FDB295
o Compatible Detector Base Addressable: FDB221; FDB222
o Compatible Detector Base Collective: FDB201; FDB202
o The Safety barrier SB3 shunt Zener diode barrier and the safety barrier FDCL 221-EX are used as an interface
between explosion-hazard and non-hazardous areas. The Ex approval is not integral part of this certificate;
see BVS 12 ATEX E 087 X and BVS 12 ATEX E 094.
o Can be used addressed on the FD-Net of Sinteso® fire control panels FC2020-AA; FC2020-AE; FC2040-AA;
FC2040-AE and collective, if connected to the Transponder FDCIO223 on the FD-Net of Sinteso® fire control
panels.
• OP720 Smoke Detector o Compatible Base Attachment: BA720
o Compatible Base Attachment Wet: BA721
o Compatible Detector Base Addressable: DB720; DB721; DB722
o Compatible Base Attachment / Base Seal: BA720/RS720
o Can be used addressed on the CNET of CerberusPRO® fire control panels FC722-ZA; FC722-ZE; FC724-ZA;
FC724-ZE.