User Manual

Declaration of performance No 0786-CPR-21527
EN
8 / 94
Siemens Schweiz AG
V03
8 / 94
EN 54-7:2000 + A1:2002 + A2:2006
Essential characteristics Section Performance
Additional requirements for software-controlled detectors 4.11 Passed
Supply voltage tolerance
Fluctuations in supply parameters 5.5 Passed
Stability of operational reliability, temperature resistance
Dry heat (during operation) 5.8 Passed
Cold (during operation) 5.9 Passed
Stability of operational reliability, vibration resistance
Impact (during operation) 5.13 Passed
Blow (during operation) 5.14 Passed
Oscillation, sinusoidal (during operation) 5.15 Passed
Oscillation, sinusoidal (endurance test) 5.16 Passed
Stability of operational reliability, moisture resistance
Humid heat, constant (during operation) 5.10 Passed
Humid heat, constant (endurance test) 5.11 Passed
Stability of operational reliability, corrosion resistance
Sulphur dioxide (SO
2
) corrosion (endurance test) 5.12 Passed
Stability of operational reliability, electrical stability
Electromagnetic compatibility (EMC), interference immunity
tests (during operation)
5.17 Passed
EN 54-25:2008 + AC:2012
Essential characteristics Section Performance
Performance in the event of fire
General 4.1 Passed
Integrity of alarm signal 4.2.2 Passed
General 5.2 Passed
Manufacturing tolerance test 8.3.7 Passed
Response delay (response time in the event of alarm)
Alarm signal integrity test 8.2.3 Passed
Test of mutual interference between systems from the same
manufacturer
8.2.6 Passed
Operational reliability
Immunity to path attenuation 4.2.1 Passed
Identification of component connected to HF 4.2.3 Passed
Performance characteristics of recipient 4.2.4 Passed
Immunity to interference 4.2.5 Passed
Loss of communication 4.2.6 Passed
Antenna 4.2.7 Passed
Power supply equipment 5.3 Passed
Environmental test requirements 5.4 Passed
Documentation 6 Passed
Labelling 7 Passed
Test of immunity to path attenuation 8.2.2 Passed
Test for identifying components connected to HF 8.2.4 Passed
Test of recipient performance characteristics 8.2.5 Passed
Test of compatibility with other frequency range users 8.2.7 Passed
Identification test in the event of loss of communication with a
connection
8.2.8 Passed
Antenna test 8.2.9 Passed
General 8.3.1 Passed
Plan for testing components 8.3.2 Passed
Assessment of service life of autonomous energy source(s) 8.3.3 Passed
Test of fault message for "weak energy supply" state 8.3.4 Passed