User Manual

Shield connec. kit (EBA2001) FHA2045
1
Description
3
Siemens Industry, Inc. A6V10437430_en--_a
Building Technologies Division 2014-08-18
1 Shield connec. kit (EBA2001) FHA2045
1.1 Description
The shield connection kit (EBA2001) FHA2045 is for installation in the booster amplifier
(100 W) EBA2001 and ensures reliable ground contact for the shielded cables to the
Line OUT and Line IN connection X3 and X4. The shield connection kit (EBA2001) is
an optional component and is supplied with all individual parts.
1.2 Installing the shield connection kit (EBA2001)
2
1
3
4
Installing the shield connection kit (EBA2001) in the enclosure FHA2016
1
Shield connection term
inal block
2
2x threaded sleeves in back box
3
Neutral conductor busbar, L
=
100
mm
4
2x
#4
-
40 pan
-
head Phillips screws, L ¼"
1. Plug the shield connection terminal block (1) onto the busbar (3) from above as
shown.
2. Install the busbar (3) together with the shield connection terminal block (1) by
inserting the two screws (4) into the threaded sleeves in the back box (2).