User Manual

Shield connec. kit (EBA2001) FHA2045
1
Preparing and installin
g the cable
5
Siemens Industry, Inc. A6V10437430_en--_a
Building Technologies Division 2014-08-18
Laying the cable and connecting the shield
1
2
3
4
Installation situation
1 Exposed shielding in the shield connection terminal block
2 Shield connection kit (EBA2001) installed
3 Shielded cable to X3 or X4
4 Booster amplifier mainboard (100 W) EBA2004
1. Lay the shielded cable (3) so that the exposed braid comes to rest directly in the
shield connection terminal block (1).
2. If necessary, lay an additional shielded cable through the same shield connection
terminal block.
3. Tighten the knurled screws for the shield connection terminal block to fix the cable
in place.