Installation Instructions

To next Initiating Device
From previous Initating Device
N.O.
Contact
Supplement Contact (N.O. or N.C.)
Pigtail leads are NOT to be used in the
Initiating circuit.
-these are only for supplemental
circuits (annunciators, etc...)
(Note: Pigtail leads are only on units
with supplemental contacts.)
Terminals will accept #14 AWG or smaller wire
When using #10 or #12 AWG wire use
Panduit terminal PV106LF or equivalent for
connection of wires.
Contact Rating: 3A 125 VAC
.5A 125 VDC
To maintain proper supervision of initating circuits the following
Wiring Diagram must be followed EXACTLY!
F1GGT
F1GHT
F1GT
INSTRUCTION SHEET For NON-CODE STATIONS
F1 Series NON-CODE Stations
F451071
Key
Switch
Add to
diagrams
at left
to make
F6 Station
Key Switch
444519
315-444519-2
Siemens Industry, Inc.
Building Technologies Division • Florham Park, NJ
Tel: [phone] • Fax: [phone]
Web: www.faradayfirealarms.com