Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsSMS-S Single Action Manual Station, Installation Instructions

Intelligent Initiating Devices

3401

s Canada Limited

Data Sheet

Fire Safety & Security Products

Intelligent Initiating Devices

Manual Stations (for Canada Only)

Models MSI-30BC and MSI-51BD

ARCHITECT AND ENGINEER SPECIFICATIONS

Product Overview

The Two-Stage, Dual-Address Intelligent

Manual Station (Model MS

I-30BC) with

sophisticated control-panel communication

from Siemens Canada Limited

─ Fire Safety

provides the most advanced method of

address programming and supervision

currently available to the fire industry.

Model MS

I-30BC is the essence of an

intelligent, initiating device through its

built-in microcomputer-chip technology; as

well as its sophisticated, bi-directional

communication capabilities with

FireFinder XLS and the MXL control

panels.

The pull switch and the second-stage key

Switch have their own addresses, and each

is fully identifiable. Only one (1) pair of

wires is required for Model MS

I-30BC.

The Single-Address

Intelligent Manual

Station (Model MS

I-51BD) is also an

addressable device; however Model MS

I-

51BD provides single-address

communication, and does not come with a

key switch. Both stations have N.C auxiliary

contacts when in the Normal condition.

Specifications

Models MSI-30BC and MSI-51BD are

constructed of durable-molded

polycarbonate material, which is matte

finished in red with raised white lettering.

The housing for Model MS

I-30BC

accommodates a ‘pull-down’ lever which

─

when operated ─ locks in position, indicating

the manual station has been activated.

 Durable design

 Shock and vibration resistant

 Pull-down lever remains down until reset

 Normally closed (N.C) auxiliary contacts

 Dynamic supervision

 For Model MSI-30BC:

 Reset with Allen Key

 Two-wire / two-stage, dual-address operation

 Surface or semi-flush installation

 Model DPU programs and verifies the device

addresses tests for functionality

 Electronic address programming is easier and

more dependable

MSI-30BC

(with key switch)

 Fitted with screw terminals

 Compatibility with FireFinder

XLS

and MXL control panels



ULC Listed

MSI-51BD

(without key switch)

Summary of content (4 pages)

PAGE 1
s Data Sheet Fire Safety & Security Products Intelligent Initiating Devices Manual Stations (for Canada Only) Models MSI-30BC and MSI-51BD ARCHITECT AND ENGINEER SPECIFICATIONS  Durable design  Shock and vibration resistant  Pull-down lever remains down until reset  Normally closed (N.
PAGE 2
Specifications ─ (continued) The pull-down lever remains down and locked, until the manual station is reset, via first opening the hinged housing cover with an Allen Key, followed by closing and locking the cover. Model MSI-30BC is designed for two-stage applications: The first-stage alarm is activated when the pull-down lever is manually triggered; while the second-stage alarm is activated when the key switch is turned to ‘On.
PAGE 3
Mounting Diagrams MSI-51BD MSI-30BC Wiring Diagrams MSI-30BC MSI-51BD Notes: 1. Recommended wire sizes:  18 AWG minimum, 14 AWG maximum [For example, at the control panel, the device ground terminal shall be connected to the grounded device box.] 2. Wire larger than 14 AWG can damage the connector. 3. When using shielded cable without metal raceway or with nonmetallic raceway, the shields should be terminated at the device ground terminal.
PAGE 4
Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product’s installation instructions. s Canada, Ltd. Building Technologies Division SBT, Ltd. URL: www.Siemens.Ca Fire Safety 2 Kenview Boulevard Brampton, Ontario L6T 5E4 / Canada Tel: (905) 799-9937 FAX: (905) 799-9858 June 2012 Supersedes sheet dated 1/10 (Rev.