Installation Instructions

Chapter 2 Installation
17
1. Create a network MXL System using the CSG-M.
2. Add the current MXL configuration to the XNET node map. It can be inserted
at any address, however it is advisable to use node address 1.
3. Add NCCNT-GL to the node map at address 2.
4. Edit the configuration for the MXL and add a NIM-1R/-1W at an available
module address.
NOTE: The NCCNT-GL will look like an NIM-1R/-1W to the MXL. You do
NOT install an actual NIM-1R/-1W card into the system.
All SBT, Inc. computers are preloaded with the NCCNT-G/GL software.
Follow the procedure in Step 5 to:
• re-install the software when necessary
• upgrade a system
• install the system on a computer that is not preconfigured from SBT, Inc.
5. Next, proceed with the software installation procedure outlined below.
• Install MS Windows NT Version Workstation.
• Install MS Windows NT 4.00 Service pack 5 or greater.
• Insert your NCC-G/-GL/-T software key into an available parallel port.
• Logon as administrator (Note that a default installation of NT has a blank
password).
• Add a user named "firefinder" and password "firefinder":
- Navigate from the START button Start> Programs> Administrative
Tools> User Manager.
- From the User manager dialog, select the "User" menu item. In the
User menu select "New User". Refer to Figure 12.
Figure 12
Adding A New User From The User Manager Screen